Revo M1-601 mini pc

Dazzler
Dazzler Member Posts: 1 New User
edited March 2023 in 2017 Archives
Hi all my
Revo M1-601 had no space to update windows 10 so I did a factory reset.
Now it will not go past the acer logo it keeps showing the logo then it goes blank then the logo appears again.
That is all it keeps doing.
Any help guys

Answers

  • IronFly
    IronFly ACE Posts: 18,413 Trailblazer

    i think you need to do a windows 10 clean installation:

    1) download a windows 10 iso using Microsof tool:
    http://go.microsoft.com/fwlink/?LinkId=691209
    select the proper windows 10 version (the same installed on your laptop) and choose to save it as iso file when prompted
    2) download Rufus:
    http://rufus.akeo.ie/?locale=en_US
    plug your USB flash drive, run Rufus then:
    select ISO image from the dropdown menu near "Create a bootable disk"
    click on the little icon on the right and browse to the windows 10 downloaded iso file
    as Partitions scheme select "GPT partition scheme for UEFI"
    as File system select "FAT32"
    click on Start
    wait until it finish, then uplug your USB flash drive
    3) backup all your personal data
    4) Reboot to BIOS, pressing F2 at boot, then press F9 to load default and F10 to save and exit
    5) plug your USB flash drive and at boot press F12 (if F12 doesn't work, see if it auto-recognise the USB flash drive or press F2 to enter BIOS and enable F12 boot menu under BOOT tab), choose the USB flash drive as bootable device

    I'm not an Acer employee.