Predator x34 Overclocking

Hi there,

I have read through some of the other related posts on this subject here, but im still partially open to more questions.

I have G-sync version. Bought 16.7.17 Windows 10, G3 Predator.

After discovering that 1 hdmi port and the dispaly adapter port were plugged up and no signals recieved.

I realised those ports were disabled.

I connected via the graphics card avi adapter to X34 HDMI (single cable). Worked fine. But only at 50hz.

Tried adjusting the settings with advanced nvidia control panel but it doesnt change. In the other threads here

i have seen replies that HDMI wont go past 60hz.

Would a avi to display port cable get around this? Any ideas.

Cheers

Accepted answers

Update guys.

Went back to the display port cable supplied and put the screen into eco mode.

Then was able to activate the overclocking . Enabled and apply and reboot. 100hz

Worked.

Update guys.

Went back to the display port cable supplied and put the screen into eco mode.

Then was able to activate the overclocking . Enabled and apply and reboot. 100hz

Worked.