SSD dead. How to reinstall OS in a new SSD?

schumi00
schumi00 Member Posts: 2 New User
edited March 2023 in 2017 Archives

I have a Acer Aspire s3-391-9499 laptop.  The SSD drive mostly like is dead.  I plan to buy a new SSD.  But, what is the best way to install an OS on the new SSD?  I am not sure if I still have any recovery disk from the old OS.  I had Win 8.1 before the old SSD was dead.

 

Thanks!

Answers

  • IronFly
    IronFly ACE Posts: 18,413 Trailblazer

    1) download a windows 10 iso using Microsof tool:
    http://go.microsoft.com/fwlink/?LinkId=691209
    select the proper windows 10 version (the same installed on your laptop) and choose to save it as iso file when prompted
    2) download Rufus:
    http://rufus.akeo.ie/?locale=en_US
    plug your USB flash drive, run Rufus then:
    select ISO image from the dropdown menu near "Create a bootable disk"
    click on the little icon on the right and browse to the windows 10 downloaded iso file
    as Partitions scheme select "GPT partition scheme for UEFI"
    as File system select "FAT32"
    click on Start
    wait until it finish, then uplug your USB flash drive
    3) backup all your personal data
    4) Reboot to BIOS, pressing F2 at boot, then press F9 to load default and F10 to save and exit
    5) plug your USB flash drive and at boot press F12 (if F12 doesn't work, see if it auto-recognise the USB flash drive or press F2 to enter BIOS and enable F12 boot menu under BOOT tab), choose the USB flash drive as bootable device
    6) proceed with windows 10 installation

     

    if you want windows 8.1, simply download the 8.1 iso and follow the same steps:

    https://www.microsoft.com/en-us/software-download/windows8

     

    then you can download the needed drivers and software from Acer support website:

    https://www.acer.com/ac/en/US/content/support-product/4088?b=1

     

    product key is not needed since it's embedded on BIOS and will be read automatically from installation.

    I'm not an Acer employee.
  • schumi00
    schumi00 Member Posts: 2 New User

    Thanks for the reply.  Very helpful.

     

    If I go with Windows 10, will I have issues with the drivers?  I checked the Acer support site.  It seems that they do not provide drivers for Windows 10.  Would this be a problem?

     

    I also heard some saying that you have to have a disk from Acer to instal Windows OS using the embedded product key, and the one downloaded from Microsoft may not work.  Is this true?

     

    Again, thanks a lot for the help!  Really appreciated!

  • IronFly
    IronFly ACE Posts: 18,413 Trailblazer

    windows 10 normally will be able to install all the needed drivers, at least once connected to the web.

     

    about product key, it was true on windows 7, not from windows 8 and up.

    I'm not an Acer employee.