Acer Predator 17 G9 793

skyrus
skyrus Member Posts: 19

Tinkerer

edited March 2023 in 2017 Archives

How to set up RAID 0? I have 2 ssd disks m.2 slots (238gb) and 1 hdd disk (1tb)

Bios is locked and RAID controller is turned ON, I tried to press ctrl+I and f6 buttons on the boot menu but nothing happening.

How to open raid configuration? Thanks in advance!

Answers

  • skyrus
    skyrus Member Posts: 19

    Tinkerer

    nobody have solution?(
  • IronFly
    IronFly ACE Posts: 18,413 Trailblazer

    have you tried using Intel iRST software from windows?

    I'm not an Acer employee.
  • skyrus
    skyrus Member Posts: 19

    Tinkerer

    Hi IronFly, I dont have any windows installed yet and I dont want to install windows 10 on HDD disk and then from that open Intel iRST programm and create raid 0 with 2 SSD disks m.2 slot and install second windows 10 on those and even if I will do that and later I will want to change this HDD disk, my raid 0 will not work and I will lose all... This is so weird! Why there is no option to do raid from bios or open iRST with ctrl + I command, there is should be some solution!
    I want to make raid 0 with 2 SSD m.2 disks without them be depend by HDD disk and I would like to install windows 7 as a second OS on HDD disk later.
  • IronFly
    IronFly ACE Posts: 18,413 Trailblazer

    i understand and i agree about the lack of RAID control panel.

     

    by the way, you can try to create a RAID0 enviroment using Intel RAID Cli, have a read here for some instructions or tips:

    http://community.acer.com/t5/Swift-Spin-S-and-R-Series/R13-R7-371T-Raid-0/td-p/366145

     

    the discussion is about RAID0 on R13 but can apply to your G9 too

    I'm not an Acer employee.