Veriton X490G BSOD after RAM upgrade

kamote

Hi!

So after installing the new 4GB stick of ram, windows kept on restarting every time I boot it. I've tried booting into safe mode and launching start-up repair but it always ending up in BSOD. Please note that I'm only booting with the new ram.

 

When I put back my 2gb ram everything starts normally and there was no problem. So i'm thinking my culprit is the new 4gb. Here is the specs of the new ram: Kingston 4GB PC3-12800 CL11 240Pin DIMM, Part number: KVR16N11S8/4

 

I wanted to try changing the memory settings in BIOS but there was none. I'm only seeing the basic options in bios and there was no option to set the memory timings, etc. etc.

I'm wondering why there was no settings for it because in my other motherboard there are options to change the timings of the memory.

 

I'm also thinking of updating the bios of the motherboard but I can't find any for this acer motherboard. I hope someone could lead me where I can download the latest bios updates.

 

 

Thanks.

Amante

Same problem with me....i have two 4GB Ram installed.....If i disable memory mapping on bios the server wont boot......if i enable the option the server will boot . the bios show 8GB intalled ram but the usable is only 4GB after i check in the OS....