24" Acer Lcd Model# X233H

Jerrymc3
Jerrymc3 Member Posts: 2 New User

I turnedmy computer on yesterday and and the Acer Logo screen came up then it said no signal.  I pushed the menu button to check the inputs but the menu didn't come up.  I turned it off and on again, bhe light turned blue on the on off button came on, the logo, and then no signal again.  I plugged another monitor into the same DVI cable and it worked fine.  Any ideas on what the problem is and how to fix it?

 

Jerry

Answers

  • Cory-Acer
    Cory-Acer Administrator Posts: 1,449 Community Administrator

    Hi Jerry,

     

    I might start with a power reset. Unplug everything and just hold the power button for about 15-20 seconds. This would take care of any simplistic issue.


    There is a small possibility that it's the DVI port itself. Is it possible to try another connection type on the monitor?

     

    Finally, sometimes you get to see a failure coming, may it flickers or turns off/on and then other times the monitor may have failed. There isn't a ton of troubleshooting that you have to do fortunately.

     

    Hope this helps,
    Cory

  • Jerrymc3
    Jerrymc3 Member Posts: 2 New User

    Found the problem.  Apparently the DVI input is bad.  I tried a cable to the VGA input and its working now.

     

    Jerry