Examples: Monday, today, last week, Mar 26, 3/26/04

This page has been archived.

The content on this page may be out-of-date or have been superseded by newer information, and links on this page to other sites may not work. This page has been archived for future reference.

Visit our Product Forums for more current content.

Register to get all the benefits of being a member! Get social and introduce yourself in our Welcome Forum, or learn about our ACE Program and What's Happening at Acer.

acer A500 power switch

sivaramrb901sivaramrb901 Posts: 1Member

Hi, Just wanted to know the procedure to replace ACER Iconia A500 power switch replacement centre in Bangalore

Answers

  • freezafreeza Posts: 1,316Member

    Good day

     

    The power switch button is embedded on the mainboard. Whats wrong with the button?

     

    Regards,

    Freeza

  • DkanDkan Posts: 2Member
    I am having issues too with my A500 power button. I am able to turn it on and off by pressing at an angle with a pen cap but would like to know if this power button is a regular issue?
  • DkanDkan Posts: 2Member

    Just talked with ACER, and was told that it would be $199 just to send it in to get it fixed.  The A500 has not even been out of the box for a year (gift 12/25/11) and they will not stand by their warranty of one year. It is unbelievable that as a company they still exist.  It is a power button and they can't even make one that lasts more than a year! 

  • MiketMiket Posts: 2Member

    this is a common problem with the a500. The power button is not supported well on the motherboard and if you press too hard it will break loose from the motherboard! I am a computer tech and have tried fixing this problem, but with no success!

  • InyoniInyoni Posts: 2Member

    I have two A 500's  , last week my power button on the A500 i recently purchased failed , i opened up the tab and found the same problem all of you are having . i decided to strip my other one that is a year and a half older and found that the switch is properly secured and soldered onto the board with the securing pins going right through the board . Acer need to look at there manufacturing process .

  • tlwtlw Posts: 1Member

    Our's failed also, found it completely detached  from the board. obviously a design error by Acer.

     

    [edited to comply with guidelines]

  • we3fdwe3fd Posts: 1Member

    my power switch lights up like it is on but no screen or signal of it coming on

     

  • susiew62susiew62 Posts: 1Member

    My power switch stopped working tonight too.  I have had it for a couple years but it really hadn't been used much until this last summer.  Very disappointing! 

This discussion has been closed.

Who's Online177

AGP
AGP
brummyfan2
brummyfan2
coolc
coolc
Shellybelly
Shellybelly
sindycarlo
sindycarlo
Viktorka
Viktorka
+171 Guests

Join in, share your experience!

It looks like you're new here. If you want to get involved, click one of these buttons!

Announcements

Maintenance Notice:

The Acer Community Maintenance has ended! We apologize for the delay and would like to thank everyone for their patience. We're still ironing out some details but you're more than welcome to explore! Stay tuned to the Announcements section as we'll be updating it regularly to keep you informed about the changes.

New Here?

New to Acer Community?

Register to get all the benefits of being a member! Get social and introduce yourself in our Welcome Forum, or learn about our ACE Program and What's Happening at Acer.

Member Highlight

Look at ven98 go! Raising up the ranks, helping other users in the Predator forums. Thank you for your dedication!

Total Posts and Comments: 760

Total Points:147

Total Accepted Answers: 0

ven98

Practitioner