W700 automatic repair

mohag
mohag Member Posts: 1 New User

I was trying to boot an Iconia W700 into the boot menu but it is stuck on the Acer boot screen and says that it is Preparing AUtomatic Repair. Tried holding the power button but nothing happens. Any ideas?

 

Answers

  • Blayn-Acer
    Blayn-Acer Administrator Posts: 2,355 Community Administrator

    Are you able to get into the BIOS to reset defaults? You can use the instructions at http://acer.custhelp.com/app/answers/detail/a_id/27677 to enter the BIOS. If that does not resolve your issue, you may try reloading your system using recovery disks, or contacting Acer for your region to inquire about service.

  • kmd1970
    kmd1970 Member Posts: 15 New User

    I had this happen and bunch of times.

     

    It's probably because to held the power button down too many times while it was booting windows. let it start the "automatic repair" boot and then click cancel or shut down (You should get one of these options). Dont click any option to repair or fix your drive, your computer should reboot just fine into windows. This worked for me.

     

     

  • Sentree
    Sentree Member Posts: 1 New User

    I'm having the same issue, it is stuck on the Acer load screen with the "Preparing Automatic Repair" but no matter how long I hold the power button or any combination of buttons down it will not shutdown or re-boot. any help?

This discussion has been closed.