Problem to Upgrade notebook aspire 7720g

bowman1967
bowman1967 Member Posts: 1 New User

Hi to everybody.

I decide to improve my acer aspire 7720g with a sata ssd hard disk and a new graphic board but I ha ve two problems. 

About the hdd the installation processo of Windows spero tells me that no hard disk is detected. I have also tried with a traditional hdd already formatted but I have the same problem. 

About the graphic board I have an error message about the different bios of the new graphic board, 30 sec of beep after that start the installation of Windows with the problem mentioned above.

I hope that some of you have understood my problems and was able to give me a solution.

 

Thanks in advance.

Answers

  • JackE
    JackE ACE Posts: 45,199 Trailblazer

    First resolve the HDD issue preferrably with the original video only. Then cold boot. At the Acer logo screen, press F2 to enter the bios. If the bios detects the new HDD OK, exit and save settings. Report back with results.

     

    Jack E/NJ 

    Jack E/NJ