Veriton M670G bios update

larstore

After I updated my Veriton M670G bios the cpu-fan runs with full speed. Any ideas?

laurent_14

Hello,

 

Just after a bios update, you have to load the default settings in the bios utility:

1. Flash bios
2. The machine restart
3. Press [Delete] to enter in the bios setup utility
4. Press [F9] to load the default settings (Acer thermal module)
5. Press [F10] to save and exit

laurent_14

Hello,

 

Just after a bios update, you have to load the default settings in the bios utility:

1. Flash bios
2. The machine restart
3. Press [Delete] to enter in the bios setup utility
4. Press [F9] to load the default settings (Acer thermal module)
5. Press [F10] to save and exit

larstore

I did several times....

laurent_14

Check in the bios setup utility:

PC Health status - Smart Fan: Enabled and the Cmos battery voltage

larstore

After reflashing bios and loading default parameters it was fixed Thanx. When pc is turned off, a red light on MB is blinking. It`s located between the ram-sockets on the lower end. Any idea?

laurent_14

Hello,

 

When pc is turned off, a red light on MB is blinking. It`s located between the ram-sockets on the lower end. Any idea?
Do you see a mark on the PCB?