Replacing HDD with SSB 480GB drive - Aspire V7 582p help please

welshr
welshr Member Posts: 16 Troubleshooter

It seems a simple job removing the back cover[All screws same length, earthing yourself, and replacing. But if the new drive has a clone or image of old HDD using say Macrium reflect has anyone come up against W10 not being recognised even though windows key is supposed to be injected in the motherboard. 

I had a problem with this windows activation  in 2014 when Acer replaced the HDD - they had to get a local techie to call in and fix it - now out of warranty of course

Best Answer

  • welshr
    welshr Member Posts: 16 Troubleshooter
    Answer ✓

    Macrium did not back up the system partition 

     

    Problem solved when it was copied over

     

    Thanks all

Answers

  • philetus
    philetus ACE Posts: 4,759 Pathfinder

    Once you have the HDD out, clone it to the SSD with another computer and when you put it in and boot, other than recognizing that the HDD magically turned into a SSD, Windows won't even know something else happened and you will still be activated.

  • JordanB
    JordanB ACE Posts: 3,729 Pathfinder

    You shouldn't worry about re-activation. It's not a big deal to replace your HDD or SSD and have Windows 10 re-activate.  

     

    You can clone or

    You can clean install windows 10 or

    You can create recovery media and re-install with recovery media.

     

    You should always backup your important personal files no matter what....before you attempt to replace your HDD or SSD.

     

    And create recovery media (and also an Applicationns and Drivers backup if you use any of the Acer pre-installed software)

     

    http://acer--uk.custhelp.com/app/answers/detail/a_id/29925/~/use-acer-erecovery-management-to-restore-your-system-or-create-recovery-media

     

     

     

     

     

     

    I'm not an Acer employee.
  • philetus
    philetus ACE Posts: 4,759 Pathfinder

    He asked about cloneing.With a clone you don't have to reinstall the Windows and the programs and the updates and drivers and etc. 

  • welshr
    welshr Member Posts: 16 Troubleshooter
    Hardware done but won't boot - is this due to multiple partitions or shrinking them down to 480 HB ssd - old drive was 500
    Using dos all files seem to be on the ssd
    Urgent help please
  • welshr
    welshr Member Posts: 16 Troubleshooter
    Used the macro in boot disk ok so partition not active
  • welshr
    welshr Member Posts: 16 Troubleshooter
    Used Macrium fix boot problem tool off sub with no result
    It is only showing 1 active partition 5 others greyed out
  • welshr
    welshr Member Posts: 16 Troubleshooter
    Sorry that should say USB
  • welshr
    welshr Member Posts: 16 Troubleshooter
    Of course I still have the old hdd and another image and all files backed up with cobian
  • philetus
    philetus ACE Posts: 4,759 Pathfinder

    Did you use Macrium to do the clone?

    Did you shrink it to exactly 480GB or under?

     

  • welshr
    welshr Member Posts: 16 Troubleshooter
    No I just let macrium do its thing
    It did say it was trimming to suit
    Thanks for prompt reply
  • welshr
    welshr Member Posts: 16 Troubleshooter
    It was an image not a clone
  • welshr
    welshr Member Posts: 16 Troubleshooter
    Answer ✓

    Macrium did not back up the system partition 

     

    Problem solved when it was copied over

     

    Thanks all