Acerc720 screen stays very dim and will not brighten

jlsjd
jlsjd Member Posts: 4 New User

I have a (student) Acerc720 that was dropped, and now the screen will not brighten. I tried the powerwash suggestion recommended here, and also checked to see if the function keys were turned on (not an easy thing to do with the screen so dark). Nothing so far helped.

 

Any other suggestions? 

Best Answer

  • laurent_14
    laurent_14 ACE Posts: 10,042 Trailblazer
    Answer ✓

    Hello,

     

    Chek the EDP cable/LCD connector like thos:

    1. Unscrew the screws of the bottom
    2. Remove the bottom
    3. Disconnect the battery from the motherboard
    4. Remove the LCD bezel
    5. The LCD connector is located in middle and under the black tape. Check if it is correctly inserted.

    If that doesn't solve your issue, the LCD panel is defective.

    France

Answers

  • Hello,

     

    Do you have the same issue with an LCD TV in using the HDMI port?

    France
  • jlsjd
    jlsjd Member Posts: 4 New User

    I just tried it with a projector, and I can see the screen.

  • laurent_14
    laurent_14 ACE Posts: 10,042 Trailblazer
    Answer ✓

    Hello,

     

    Chek the EDP cable/LCD connector like thos:

    1. Unscrew the screws of the bottom
    2. Remove the bottom
    3. Disconnect the battery from the motherboard
    4. Remove the LCD bezel
    5. The LCD connector is located in middle and under the black tape. Check if it is correctly inserted.

    If that doesn't solve your issue, the LCD panel is defective.

    France
  • jlsjd
    jlsjd Member Posts: 4 New User

    Thank you, that did it Smiley Happy