V5 573g not working on battery

ed091maf

My laptop stopped working on battery. Starting on battery doesn't work, the computer is totally dead. However when i plug in AC adapter, i can boot. Then after the computer booted, if i unplug AC adapter, the computer immediately turns off. Below is information generated by BatteryInfoView. It seems that the battery itself is OK. What could be the problem? Tried to unplug and plug batter to the motherboard, didn't help.

 

 

Description Value

Battery Name	AP13B3K
Manufacture Name	SANYO
Serial Number	12742
Manufacture Date
Power State	AC Power
Current Capacity (in %)	100.0%
Current Capacity Value	51,045 mWh
Full Charged Capacity	51,045 mWh
Designed Capacity	53,400 mWh
Battery Wear Level	95.6%
Voltage	17,030 millivolts
Charge/Discharge Rate	0 milliwatts
Chemistry	Lithium Ion
Low Battery Capacity (1)	2,040 mWh
Low Battery Capacity (2)	4,500 mWh

ed091maf

It seems the problem solved itself. Here's what i observed during the last three days. 

T-2: computer still doesn't work on battery (if unplugged, everything turns off immediately. it's like unplugging desktop computer). If plugged in, the computer works perfectly. The battery light on the front was always blue and win10 showed that battery is 100% charged.

T-1: After some work i shut down my computer. And then i noticed that the battery light on the front was orange (not blue like always). After around 10 minutes it turned back to blue.

T: After getting Justin's response i shut down computer just to test what he suggested. I unplug AC, press power button and.... It finally starts on battery

 

This is all input i can give from what i observed. Never happened to me before that hardware problem magically disappears. In any case, thank you Justin for your help.