I read RAM upgrade is available for this laptop although it has no rear access plate common to may other laptops.
I assume the whole back has to be removed. Anyone else done this and ableto point me in the correct direction.
There are many online videos, photos and instructionals for the DIYers.
Look for hidden screws between the keys or top plate covers that will allow
the bottom to come loose from the top. I only have this data for you on this Model
(note that it only has one memory socket, limiting it's upgrade capabilities. Hope this helps):
Thanks for this info. There must be a way in!
Did you get to upgrade the RAM on your ACER ES1-512? I am having difficulty with replacing the stock RAM (2GB) with a 4GB DDR3? Please share your thoughts.
There is, remove all the screws from the bottom and gently pull the case apart. Be careful as the keyboard and touch pad are attached. Lift the keyboard there are two ribbon cables the narrow one connector is a lift and the wide one is a slide connector. With the keyboard\touchpad free set it aside.
There are 4 more screws to remove. First there is a screw on the cooling fan remove it and one on the mother board to the right next to the hook for the optical drive, remove it. Slide the optical disk drive out (there is no screw holding in in place now with the keyboard off. There is screw holding the HDD in place, remove it and slide the HDD out and set it aside. That is 3 screws, there is one more holding the wireless card in place near the back, it must be removed before the wireless card will come out.
There are two wires toward the front of the MB one is the battery connect, not sure what the other is for, the both need to be unplugged. Now gently lifit and roll over the MB and there is the memory module.
I know all of the because I tried to upgrade my 4 gigs to 8, but I couldn't get it to work and I am not sure why.
Oh, one last thing, the on\off switch is a micro switch on the left hand side of the computer just below the left hing on the SD card reader. It is a strange place but it does work. BEFORE you button it all Check to make sure it recognizes the new memory. Flip the MB back into place and attach the two cables at the front and click the microswitch. If the monitor comes on and gives you a HDD error then you are good to go, just hold the microswitch down for 5 seconds to turn off the computer and finish installing everything else.
if the screens doesn't come on then you have the same issue I have and the memory isn't compatible with the computer.
Thanks for all the detailed info.
Did you ever figuire out why the memory you were replacing didn't work?
Was it because it wasn't DDR3 or perhaps it needs to be Proprietary ACER Memory Module?
http://tinyurl.com/glye9e2 8GB RAM Memory for Acer Aspire ES1-512 (DDR3-12800) - Laptop Memory Upgrade from OFFTEK
im joining to the discussion. i got an acer aspire es1-512 too, which i already upgraded his hdd to ssd. now i want to upgrade the ram too. kingston 1.35v 1600mhz ddr3l wont work?
I have a ES1-521-88R9. It has two memory slots one was populated with a 8GB Samsung. I bought 8GB Skhynix from e-bay and installed it and it works perfectly. The hardest part is re-attaching the mouse pad cable.
Acer Aspire ES1-512 Laptop Factory 2Gb Ram (ACR16D3LFS1KBG / 2GB) I would like to upgrade to 4GB. Ex: (M471B5273CHO-YKO) is this Good?
[Edited the post using Google Translator as it was posted in Hungarian Language. Acer-Harvey]
It looks like you're new here. If you want to get involved, click one of these buttons!
So, what are the rules of this place? Check out our Acer Community User Agreement. Register
to get all
the benefits of being a member! Get social and introduce yourself
Welcome Forum, or learn about our
ACE Program and
What's Happening at Acer.
Acer Community User Agreement.
Sign up for an Acer ID and get exclusive access to deals and the Predator Den community, where you can ask and answer questions about gaming and gear.