Aspire one D260 help!

Options
nimb777
nimb777 Member Posts: 8 New User

Does anyone still have it?

If so I'd really appreciate some help I've been trying to fix this for a couple years without success with the search engines.

anyways i just figured it would be simplier if I could get it from any similar laptop.

http://www13.plala.or.jp/setfsb/download/ver22/setfsb_2_2_134_98.zip  --create/export to get me the clockgen so i can repair it.

Regards

 

Answers

  • JackE
    JackE ACE Posts: 44,631 Trailblazer
    Options

    What is a clockgen? I'm not familiar with the term.  And how do you plan to repair it? What is the zip file supposed to do?

     

    Jack E/NJ

    Jack E/NJ

  • nimb777
    nimb777 Member Posts: 8 New User
    Options

    Hey,

    Thanks for the reply!

     

    Clock generator is the tiny circuitry that controls the frequencies of the various interfaces, say pci, cpu, memory or video.

    The zip file on the link allows the export of these configurations. To fix my system tables, I would need someone to download and unzip it, open the .exe file, click on the creator tab, choose export and post it. Then I would simply download the file, import and set.

     

    Here's a few links:

    http://www13.plala.or.jp/setfsb/

    http://en.wikipedia.org/wiki/Clock_generator

     

    This is what I found online, but I do not  know if it is correct or recommend anyone doing anything like that before exporting and securing the exported file online.

    http://forum.notebookreview.com/hardware-components-aftermarket-upgrades/636755-clock-generator-9lvrs387aklf-aspire-one-d260.html

    http://forum.notebookreview.com/alienware-m11x/463095-m11x-clock-generator-ics9lprs387bklf-12.html

     

    Regards,

    Nimb777

     

  • JackE
    JackE ACE Posts: 44,631 Trailblazer
    Options

    >>> To fix my system tables, I would need someone to download and unzip it, open the .exe file, click on the creator tab, choose export and post it. Then I would simply download the file, import and set.>>>


    I'm a bit confused here. What problems did you have when downloading, unzipping and running the executable?

     

    Jack E/NJ

    Jack E/NJ

  • nimb777
    nimb777 Member Posts: 8 New User
    Options

    Sorry that my choice of words was confusing. I had no problems there. I lost the pll overwriting it.

     

    Regards,

    Nimb777

     

  • JackE
    JackE ACE Posts: 44,631 Trailblazer
    Options

    A pll?  A phase locked loop? Or a pll file? Or something else? In any case, why can't you do what you want to do from another computer?

     

    Jack E/NJ

    Jack E/NJ

  • nimb777
    nimb777 Member Posts: 8 New User
    Options

    PLL is the clock generator file extention, as in .pll.

    I had nother d260, but it was stolen. So I have no access to this specific model to have a confirmation about the clockgen version and/or export the correct file.

    The SetFsb does not have such .pll on its source code.

     

    Regards,

    Nimb777

  • JackE
    JackE ACE Posts: 44,631 Trailblazer
    Options

    >>>The SetFsb does not have such .pll on its source code.>>>

     

    Maybe because the frequency is NOT software controllable in your machine.

     

    Jack E/NJ

     

     

     

     

    Jack E/NJ

  • nimb777
    nimb777 Member Posts: 8 New User
    Options
    It can. The clock generator is a small chip on the motherboard. I believe that would be the case for the CPU side of the bus , but the processor can be hardmodded by cutting pin 14. Setting wrong values for its clock frequencies causes an exception that shows as red values at the table. I think it means the resonator is not working at the same frequencies with the cpu and slowing it down flooding the cache while the system waits for the next cycle.
  • JackE
    JackE ACE Posts: 44,631 Trailblazer
    Options

    >>>It can.>>>by cutting pin 14>>>

     

    Heh-heh. Sorta reminds me of how some folks really enjoy doing TX and other mods on 2-ways. So, I stand corrected.  It's not 'supposed to be' software controlled. 8^) Have fun with it! 

     

    Jack E/NJ  

    Jack E/NJ

  • nimb777
    nimb777 Member Posts: 8 New User
    Options
    Yes, there are a lot of modders out there. Im sure this is supposed to be about a file though.
This discussion has been closed.