The Iconia A700 worked well for 14 months and one day when Battery was low, we turned it off and charged the battery till fully charged (Whit light). Then when we removed it from charger, we tried to turn it on, nothing happened. No power light, no vibration, no screen logo. I noticed the unit got warm as if the power was getting to the inside controller. I waited and it styae warm till the battery was spent. I charged again and tried to turn it on the light went from White to orange and nothing happened again. I tried reset and holding the On button and vloume buttons (Tried both), nothing happened. I opened the unit and checked for smoke, burn marks and broken connection, etc. All looked great and clean. Imeasured the battery and it was fully charged and try to turn the system on and saw chips getting warm and measured battery undr load and it was OK. I got a brand new batter and it behave exactly the same as the original battery (The Battery is not cheap) Here is summary:
- Unit was working well before, no indication of problem.
- Battery charges and holds charge.
- No power light if not connected to charger
- The unit warms up as if controller working
- No display
- No vibration
- no sound
- New battery behaved the same.
- Screen is good
- Digitizer is good
- There are two other boards. I will have to eliminate those as problem.
My conclusion is that the controller logic card is bad. I am puzzled why the power light does not come on when not connected to charger.
Any body who has had experience with the smae issue please share. I will update this post as I am determined to fix the tablet. I am contemplating:
- Buying dead units and use for parts or
- Buy one with broken screen and swap parts.