Liquid Z 3 how to use small-screen-receving-phone-call ?

davidroux
davidroux Member Posts: 2 New User

Hello, 

I would like to know how to use the little screen that appear in a case of receving a phone call.

There's two types of screen wen we receve a phone call. I know how to use the biggest one. But not for the smallest. The help for the small one indicates that we have to drag the green phone symbol I suppose, but to drop on what ? The user manual doesn't explain it at all, that's not obvious !

Thank you for your help ! 

Best Answer

  • IronFly
    IronFly ACE Posts: 18,413 Trailblazer
    Answer ✓

    With "float caller" enabled, you just need to tap red or green button, no need to swipe, if the "little screen" is the one in the attachment


    I'm not an Acer employee.

Answers

  • vvprad
    vvprad Member Posts: 246 Mr. Fixit WiFi Icon

    Hi..

     

    You may download the user manual for this phone from the below and check the Page 23 ("The voice call screen" section).

     

    Here is the link : http://global-download.acer.com/GDFiles/Document/User%20Manual/User%20Manual_Acer_1.0_A_A.pdf?acerid=635143278731826156&Step1=SMARTPHONE&Step2=ZSERIES&Step3=Z130&OS=ALL&LC=en&BC=ACER&SC=PA_6 

  • IronFly
    IronFly ACE Posts: 18,413 Trailblazer
    Answer ✓

    With "float caller" enabled, you just need to tap red or green button, no need to swipe, if the "little screen" is the one in the attachment


    I'm not an Acer employee.
  • davidroux
    davidroux Member Posts: 2 New User

    Thank you very much for your fast answers !

    Finally, I understood how it works, and I my trouble is now solved. 

    @ IronFly : Sorry, but on my Z3, the float caller need a swype that I finally discovered ! It is placed under the the float caller, a white symbol turns slowly to indicate the place we have to drop the red or green phone symbol we have chosen ! Not obvious at all ! And the selection of the float caller is not in the parameters section, but in the phone section, in the three-vertical-points-menu !

    And I discovered a new trouble : I have to wait before "float caller" appear when it is enabled ... I don't know how long exactly. I enabled it yesterday evening and it doesn't appear ! But it appear this morning. I supposed a entire night isn't necessary.

    However, I decided to disabled it. Not practical !

    Thank you for all !

     

This discussion has been closed.