Error Name Model M3910 After Upgrade BIOS

ghayz
ghayz Member Posts: 3 New User

hi.. i have motherboard Aspire M3910 with default BIOS P01-A3L..

then i upgrade this BIOS mobo version P01-A4...

i get error ... my motherboard model is change to M5910..

help.. i forget to back up default BIOS

Best Answer

  • laurent_14
    laurent_14 ACE Posts: 10,331 Trailblazer
    Answer ✓

    Hello,

     

    I checked the bios P01.A4 and it's common to the M3910 and M5910 models. You can't do anything (inside the rom file).

    You can pass the information up to your acer suppport by email.

    France

Answers

  • laurent_14
    laurent_14 ACE Posts: 10,331 Trailblazer

    Hello ghayz,

     

    You'll find the bios for your desktop Aspire M3910 on the Acer support website (UK or F):

     

    BIOSAcerUpdates CPU Module from 8.00.15_CPU-i7_01.0C to 8.00.15_CPU-i7_01.0F and Disable Intel Enhanced Debug mode.P01.A43.6 MB2011/05/16Download
    BIOSAcerBIOS for Linux Supports Intel Clarkdale K0 stepping CPU.P01.A3L3.6 MB2010/09/13Download
    BIOSAcerUpdates CPU micro-code to support Intel Clarkdale K0 stepping CPU.P01.A33.5 MB2010/06/22Download
    BIOSAcerBIOS (Linux & FreeDOS)P01.A0L1.4 MB2010/06/07Download
    France
  • ghayz
    ghayz Member Posts: 3 New User

    off course i download from acer websites...

    but when i finished BIOS upgrade, my motherboard incorrect model name..

    on model is M5910, not M3910

     

    just for information, i used AFUDOS P01-A4.ROM /p /b /c

  • laurent_14
    laurent_14 ACE Posts: 10,331 Trailblazer
    Answer ✓

    Hello,

     

    I checked the bios P01.A4 and it's common to the M3910 and M5910 models. You can't do anything (inside the rom file).

    You can pass the information up to your acer suppport by email.

    France
  • ghayz
    ghayz Member Posts: 3 New User

    many thanks for your help, laurent...

    i will try your suggestion.

  • ultimatescar
    ultimatescar Member Posts: 1 New User

    I'm sorry for butting in the thread. Lemme start with my problem. I am Packard bell iExtreme i7740 NC recently When its booting I see Acer Logo instead of Packardbell when I check on system properties it shows me iextreme 5800 when I run CPUZ it shows me Acer Aspire M5910 even the device and printer, computer/properties shows its AcerM5910. I know Acer owns packardbell so here is the question, Packardbell website shows the latest/last bios is P01-A3 and acer shows P01-A4 can I download and flash the acer bios in the system or is it a bad idea to do that. Suggestions appreciated.

    Thanx

This discussion has been closed.