No Bootable Device on iconia w3 810

Koussouros
Koussouros Member Posts: 14 New User

I formatted tablet

 

I have blue message No Bootable Device

 

Bios only propose boot hdd

 

I try bootable usb key, bootbale hdd and bootable sdcard that I try with  bootable w7 and bootable w98 (6 tryings)

 

Allways same message

 

I plug tablet on my notebook (seventh trying)

 

No reconized

 

Why I can instal w7

 

I need w7 for using some applications that doesn't insatll on w8

 

**bleep**ing machine, why they sell us with system and does'nt give us simple bootable usb key for choosing system we need for us ?

 

w8 doens't permit to make my work

«1

Answers

  • padgett
    padgett ACE Posts: 4,532 Pathfinder

    Which Tablet ? W3/W510 cannot boot Win 7.

  • Koussouros
    Koussouros Member Posts: 14 New User

    thanks

     

    w3 810

  • Koussouros
    Koussouros Member Posts: 14 New User

    Your cd of w8 doesn't boot

  • padgett
    padgett ACE Posts: 4,532 Pathfinder

    Well Windows 7 does not have the power management drivers that the W3 requires. If you need Windows 7 then you need a different tablet. (One with an I3 or I5).

  • Koussouros
    Koussouros Member Posts: 14 New User

    By the past I had a UMID M1 umpc with 1.2 atom, 512 mo Ram and old ssd

    I put sdcard with bootable w7 and installation worked greatly

    Moreover my UMPC worked very great

     

    There is not the problem what you said, please don't disturb the post because  my question is on boot

     

    My old umpc accepted boot on all system but Iconia, doesn't; including your w8 cd

     

    I bought a machine for making my work no a w8

     

    Microsoft tablet have w8 also but I need w7 for installing some softwares that need w7 or less

     

    I need this tablet with w7 for my work before to travel

     

    It's very important for me

     

     

  • billsey
    billsey ACE Posts: 34,101 Trailblazer

    Sorry to say the tablet will not work for you. To install and run Windows 7 you must have a motherboard design that doesn't use the newest chipset features that allow the W3 to cool without a fan. If you were able to install W7 you would find that the tablet dies at a young age... Better would be to contact your software vendor to find when they will support W8/W8.1. There is no reason I can think of for software to work in W7 and not in W8, except for a vendor wanting 'upgrade' fees for a fix.

    Click on "Like" if you find my answer useful or click on "Yes" if it answers your question.
  • Koussouros
    Koussouros Member Posts: 14 New User

    Do you know a tip for installing solidworks on w8 32 ?

     

    Tablet won't accept to boot including your cd of w8

     

     

  • padgett
    padgett ACE Posts: 4,532 Pathfinder

    With Win 8/8.1 Solidworks requires the 64 bit version. There may be Bay Trail vtabs with 64 bit 8.1 after the first of the year but no Clover Trail (W3) will have. It also requires at least 2 GB of memory so a virtual machine running Win 7 on top of 8/8.1 probably won't work but you could try.

  • Koussouros
    Koussouros Member Posts: 14 New User

    I said, "Microsoft tablet have w8 also but I need w7 for installing some softwares that need w7 or less"

     

    Yous said "There is no reason I can think of for software to work in W7"

     

    I answer to you that this software doesn't work on 8 32, only 7 32 and now yous said me tother thing

     

    Why do said me that ?

     

    Give me tip for using this software on w7 becauise you said  "There is no reason I can think of for software to work in W7"

     

    I's what for I need to use tabler with w7

  • Koussouros
    Koussouros Member Posts: 14 New User

    Do you have scheme of tablet so that I change plastic cover for integrating external dissipator for avoiding what you said about processor ?

     

    I have no my answer about boot echec

     

    tablet doens'nt accept any bood device including for acer dvd

     

    as said on my previous atom processir device I was able to boot on sd card w7 and clone

     

    I want to kniow how is will be sure tu boot any boot key, sd card or other on device for making clone of my own system

  • Koussouros
    Koussouros Member Posts: 14 New User

    Witch driver for processor cooling is ?

     

    This one ? SPB Framework inteli2c Driver, the thermal framework processor

     

    Why another brand do it for w7 ?

     

    http://www.driversforfree.com/dt_dm_os_drd/adapter/intel/windows-7/asus-intel-dynamic-platform-and-thermal-framework-processor-participant-driver/search.aspx

     

    Do you have link on intel for w7 driver ?

     

     

  • billsey
    billsey ACE Posts: 34,101 Trailblazer

    Intel doesn't have drivers for this chipset and Windows 8. They have similar drivers for the previous chipset and Windows 7 but not for the new stuff.

    Click on "Like" if you find my answer useful or click on "Yes" if it answers your question.
  • Leonid
    Leonid Member Posts: 121 Troubleshooter

    Hello Koussouros, I had "No Bootable Device" message. It was because I had erased one of the hidden partitions. These Tablets do not operate the same as a WINdows 7 Desktop/laptop. Formatting the SSDHD is not good.

     
     
  • Koussouros
    Koussouros Member Posts: 14 New User

    Ok but what I said you is that I formated a umpc with ssd, atiom1,2 and 512 ko

     

    I make a boot on sdcard for installing w7

     

    The device make boot without problem

     

    This tablet no because the acer bios is no good

     

    We have only 2 choise on boot, unknwo device and hdd

     

    So I just need to know how to boot this device

     

  • Leonid
    Leonid Member Posts: 121 Troubleshooter

    Hello again,

    I read this thread again and I was looking at this in a wrong way. Billingsley and Padget have told you correct. There are no UMPC or TABLET standards to support interchanging system software. There are several layers of new technology in this little tablet. You have Intel+Acer+Microsoft+Microsoft 8 all working together to make this one tablet work. It is totally custom built like all tablets.

     

    You can interchange systems on a desktop because the standards have been put in place. UMPC and tablets are just too new for such standards

     

    What you bought is an ACER product and only their system support will work on this tablet.

     

    I beleive Ebay is your best option to trade this for what you need.

  • Koussouros
    Koussouros Member Posts: 14 New User

    You said that you read but you nobody answer to my simple question

     

    What thiis device is no able to boot ?

     

    Any kind of problem can detroy some information in tablet an bios has to be able to permit boot on usb

     

    If no, this device is critical for work condition

     

    I work in overseas between 3 and 6 month and need to be sure that I can put clone of my system and doesn't want to reinstal w8 and all softwares

     

    I need to boot and put again my own clone for being able to work 1 hour after any crash

     

    This device is for working not for discussing about windows problem

  • padgett
    padgett ACE Posts: 4,532 Pathfinder

    Will it work with XP ? XP is pretty good with 512MB memory and you could create a virtual machine on Win 8. I would not want to try to run a Win 7 VM with only about 1.7 GB available.

  • Koussouros
    Koussouros Member Posts: 14 New User

    My question is nvery simlple

     

    Why this device is not able to boot on usb with bootable support (hdd, cd, key...)

     

    You like to give answer you have but not to answer to my question

  • padgett
    padgett ACE Posts: 4,532 Pathfinder

    I just booted mine from a Windows to Go Workspace drive built with a desktop running Windows 8.1 Enterprise. NP.

     

    It does require a USB keyboard and "F12" boot enabled in the BIOS or the boot order changed in the BIOS.

     

    It is designed not to be able to boot from or even recognise a "removable" drive unless you use the Microsoft ISO to USB converter and then the ISO must be configured for UEFI and signed by either Microsoft or Acer. (basically either Windows 8 or 8.1).

     

     

     

     

  • Koussouros
    Koussouros Member Posts: 14 New User

    Hi

     

    I said you that thes acer bios has only one boot proposal

     

    boot from hdd

    and boot from unknowdevice

     

    do you have booted after complete formatting or crash ?

     

    acer only propose a dvd but this dvd is not able to boot on acer

     

    you imagine that I have not to make profesisonal work for having boot on machine

     

    one clone made form software has to be able to boot for restaurating any crash

     

    you understand that if I need to do what you do for booting despite they give a dvd that doen'st boot, there is a problem....

     

    do you know if hyper V work on tablet and that permit to instal solidworks ?

This discussion has been closed.