How do I repair my A200 tablet? [edited title]

PINDAPOO
PINDAPOO Member Posts: 1 New User

All I want to know is how I can fix my Tablet 200.  It keeps constantly rebooting.  PLEASE HELP!

 

[edited title for visibility]

Answers

  • Sharanji
    Sharanji ACE Posts: 4,328 Pathfinder

    hi....

     

    You may perfrom a hardware reset and check if the issue is resolved.
    You need to insert a pointed object, such as a paper clip, into thereset hole to reset the tablet to its factory defaults.
    Open the Card Slot andReset Hole Cover and you will find the hardware reset pin hole.
     
    If the issue still persists, you need to perform a factory data reset.
    The following steps will erase all of your personal information, all stored contacts and any programs you have installed on your tablet:
     
    Power off the tablet.
    Press and hold the Volume up button, which is located closest to the rotation lock.
     
    Note: In landscape view, with the volume buttons across the top of the tablet, Volume Down is the lefthand button. In portrait view, with the volume buttons across the right side of the tablet, Volume Down is on the bottom.
    With Volume up button held, press and hold the Power button for 3 seconds then release it. Continue holding the Volume up button.
     
    Once the tablet vibrates, switch the touch screen lock switch on and off repeatedly while still holding the Volume up button.
    Release the Volume up button and stop switching the touch screen lock switch once the "Erasing Userdata..." message appears in the upper left corner of the screen.
    Once complete the tablet reboots and starts with the OOBE screen, at this point the tablet will have been restored to the factory default settings.
     
This discussion has been closed.