Examples: Monday, today, last week, Mar 26, 3/26/04

This page has been archived.

The content on this page may be out-of-date or have been superseded by newer information, and links on this page to other sites may not work. This page has been archived for future reference.

Visit our Product Forums for more current content.

Acer Iconia A700 screen issues

khcho90khcho90 Posts: 3Member

Hello.

 

I've lost my original charger 2 months ago. For about 2 months the Iconia A700 tablet was switched off. And when I got my new original charger, I plugged it in, but the screen began to flicker for some time. I switched it off, then plugged it in again, then after getting charged I turned it on after about 2 hours of charging. The screen was still flickering.

 

Today I turned my device on, but nothing happened, just vibration at the beginning. Then I connected it to my PC via USB cable and saw the picture. It was still flickering. After plugging it off the usb the screen turned off again. It now shows the picture only through connected charger or usb.

 

What would I need to solve this issue?

Answers

  • saywotsaywot Posts: 64Member

    You won't get much help here, I know the login page promises that theses forums connect you to "product experts and users just like you" but the product experts are scarce as hen's teeth ( or non-existant)

     

    But here's your problem.

     

    If this was a Microsoft Windows PC (or just about any PC really) I'd first update the graphic card's drivers.

    or roll them back to a previous known good version.

     

    If this didn't work I'd either go for an Operating System reinstall or I'd start suspecting a hardware failure.

     

    Acer won't give you a copy of the Android operating system (that they got for free - Android is open source), it's their view, wrongly, that a factory reset is the same as a reinstallation.

     

    All the reset does is to remove all your private details, if the software is corrupted it will remain corrupted.

     

    so if you're out of warranty you're pretty well up the creek, Acer will ask you to send the tablet back to them, this might take quite some time and if it's a hardware issue the cost of repair might make it cheaper to buy another tablet.

     

    Good luck though, try a reset, it might work

    Try emailing Acer this will take a few weeks to get any sensible dialogue from them.

    Look on eBay for a used ASUS - they have great service staff

     

     

     

     

     

     

     

     

     

     

  • khcho90khcho90 Posts: 3Member

    Thanks. 

     

    The problem isn't in the PC as I've installed everything needed to make it work with the tablet.

     

    The PC still can't recognize it. Can it be because once I charged the tablet via a non-original charger which had the same characteristics (12V, 1.5A, 18W) before my original charger arrived? Now the display is turned on only if the tablet is connected to PC or to the charger and it flickers if the battery is under 90%.

     

    Is it because of the USB plug or maybe the battery? What would you think?

  • exscentricexscentric Posts: 78Member

    I can't answer all of the questions but related to the charger .. there is one other characteristic .. the polarity.  If the polarity is different there ccould be a problem.  When you had it plugged in did the power indicator function as with the original?  If it did then all should be okay.  If it did not then it may have damaged the battery or charging system.

     

    A trick that has cured a multitude of problems is to pull the battery if possible and press power switch for a minute.  If you can't pull the battery let it run down till dead, press and hold the power switch, charge it and try it.

     

    You might try a return to factory in settings.  You will loose all data however.

     

  • khcho90khcho90 Posts: 3Member

    Thanks. Didn't know about the polarity though. The power indicator on the tablet wasn't on while being charged. So you think battery causes problems? 

     

    Return to factory settings didn't help. Will try with 0% battery, fully charge it and let let you know. Thanks for the answer.

  • exscentricexscentric Posts: 78Member

    If the polarity is wrong it will totally discharge and attempt to charge the wrong way in some cases.  There may be safety features in the unit to protect from that also so I don't know whether there was damage or not.  Most current stuff should have safety features.

     

    Hope a good solid charge works.

     

     

This discussion has been closed.

Who's Online172

AdityaShinde
AdityaShinde
cardsharp
cardsharp
HelghastPredator
HelghastPredator
kickirik
kickirik
Kno63
Kno63
MannyCalavera
MannyCalavera
peterplus
peterplus
Reinalddo
Reinalddo
ryuuichie
ryuuichie
+163 Guests

Join in, share your experience!

It looks like you're new here. If you want to get involved, click one of these buttons!

Announcements

Five Year Anniversary

Acer Community turned 5 years old this week! I would say that's a reason to celebrate!

New Here?

Register to get all the benefits of being a member! Get social and introduce yourself in our Welcome Forum, or learn about our ACE Program and What's Happening at Acer.

Member Highlight

Look at ven98 go! Raising up the ranks, helping other users in the Predator forums. Thank you for your dedication!

Total Posts and Comments: 1048

Total Points:589

Total Accepted Answers: 91

ven98 Seasoned Specialist