acer aspire one d250 black screen

jcarlosb
jcarlosb Member Posts: 1 New User

I have problems with my acer aspire one d250, for vga port works perfectly but with the lcd screen lcd does not work on but no picture and updated the bios to its latest version and the problem persists and also and proven with 3 lcd and the problem persists see who can help me. My English is not very good.

 

juan 

Answers

  • Tommy-Acer
    Tommy-Acer VIP Posts: 6,317 Seasoned Specialist WiFi Icon

    We would suggest contacting technical support in your region for further assistance with this issue.
    Acer Service and Support

  • petersimonsen
    petersimonsen Member Posts: 1 New User

    I have problems with my acer aspire one d250,

  • JackE
    JackE ACE Posts: 45,186 Trailblazer

    It is likely the video cable. Either there's a conductor break in the cable (usually near the hinge area) or the connectors are loose at the motherboard and/or LCD screen. Unfortunately, the keyboard, LCD bezel and LCD screen must be removed to access this cable and its connectors.

     

    Jack E/NJ 

    Jack E/NJ

  • padgett
    padgett ACE Posts: 4,532 Pathfinder

    If you unplug the VGA cable does the screen do anything (may take several seconds to switch) ? If it does than it is a software setting. If not then it is a hardware issue

  • JackE
    JackE ACE Posts: 45,186 Trailblazer

    Also, I have been assuming that you've tried the FN + F5 or FN + F6 video toggle switch key combinations. Have you done this?

     

    Jack E/NJ

    Jack E/NJ

This discussion has been closed.