Examples: Monday, today, last week, Mar 26, 3/26/04

This page has been archived.

The content on this page may be out-of-date or have been superseded by newer information, and links on this page to other sites may not work. This page has been archived for future reference.

Visit our Product Forums for more current content.

Register to get all the benefits of being a member! Get social and introduce yourself in our Welcome Forum, or learn about our ACE Program and What's Happening at Acer.

Gateway NV52L06u Laptop power button doesn't work

trickshot63trickshot63 Posts: 1Member

When I bought this used the plastic power button was missing. I looked down in the hole and noticed the actual power switch was about one eighth of an inch away from the hole where it was hard to even see it. Well I actually had to buy the entire top cover (keyboard bezel/palmrest) of the laptop because the plastic power button is "plastic welded" to the cover. I replaced the cover with the new cover and attached the power switch board, held in place by a plastic stud and a screw, and reassembled everything. The problem is, the power switch is too far away to be clocked by the plastic power button. There is no way to adjust anything, and I DEFINITELY have the correct new top cover (keyboard bezel/palmrest). Am I missing a part somewhere? Thanks for any help

Answers

  • zcomputerlabzcomputerlab Posts: 1Member

    I have the same problem.  I bought a like new entire top cover assembly and have same problem.  I ordered power switch using the part number off the old one and got an entirely different switch.  Right now, I bought a good used NV52L06u just so I can take apart one that works to see what makes it power up correctly.

This discussion has been closed.

Who's Online177

Bkmurder101
Bkmurder101
brummyfan2
brummyfan2
IronFly
IronFly
Kno63
Kno63
rov63rus
rov63rus
+172 Guests

Join in, share your experience!

It looks like you're new here. If you want to get involved, click one of these buttons!

Announcements

Maintenance Notice:

The Acer Community Maintenance has ended! We apologize for the delay and would like to thank everyone for their patience. We're still ironing out some details but you're more than welcome to explore! Stay tuned to the Announcements section as we'll be updating it regularly to keep you informed about the changes.

New Here?

New to Acer Community?

Register to get all the benefits of being a member! Get social and introduce yourself in our Welcome Forum, or learn about our ACE Program and What's Happening at Acer.

Member Highlight

Look at ven98 go! Raising up the ranks, helping other users in the Predator forums. Thank you for your dedication!

Total Posts and Comments: 760

Total Points:147

Total Accepted Answers: 0

ven98

Practitioner