Optiarc DVD RW AD-7585H needs drivers for Aspire 7551, Lost them due to upgrade to Windows 10

2»

Answers

  • goanderson
    goanderson Member Posts: 2 New User

    I have the same problem. When I tried to download and run the AMD Installer only went to 2% and stopped. Now what? 

  • KenOwsley62
    KenOwsley62 Member Posts: 12

    Tinkerer

    Keep trying you got the right idea
  • goanderson
    goanderson Member Posts: 2 New User

    ed to download new drivers as you instructed, downloads files ok but when I run them, stops after 2% download. Tried several times, no help.T

  • KenOwsley62
    KenOwsley62 Member Posts: 12

    Tinkerer

    http://drivers.softpedia.com/get/MOTHERBOARD/AMD/AMD-SATA-Controller-Driver-131276-for-Windows-10-64-bit.shtml

     

    Use this link and follow the directions

     

    The package provides the installation files for  AMD SATA Controller Driver version 1.3.1.276.

    If the driver is already installed on your system, updating (overwrite-installing) may fix various issues, add new functions, or just upgrade to the available version. Take into consideration that is not recommended to install the driver on Operating Systems other than stated ones.

    In order to manually update your driver, follow the steps below (the next steps):

    1. Extract the .cab file to a folder of your choice

    2. Go to Device Manager (right click on My Computer, choose Manage and then find Device Manager in the left panel), or right click on Start Menu for Windows 10 and select Device Manager

    3. Right click on the hardware device you wish to update and choose Update Driver Software

    4. Choose to select the location of the new driver manually and browse to the folder where you extracted the driver

    5. If you already have the driver installed and want to update to a newer version got to "Let me pick from a list of device drivers on my computer"

    6. Click "Have Disk"

    7. Browse to the folder where you extracted the driver and click Ok

    ABOUT SATA / AHCI / RAID DRIVER:

    When you install an operating system, SATA settings (be it AHCI, RAID, or IDE mode) are detected from the BIOS. If you want to change from one mode to another after the OS has been applied, appropriate drivers are required.

    Bear in mind that if you modify these settings without installing proper files first, the operating system will not be able to boot until changes are reverted or required drivers are applied.

    To perform the latter task, get the package, run the available setup and follow the instructions displayed on-screen for a complete installation. Afterwards, perform a system reboot so that all changes take effect, enter BIOS menu, and set the SATA option to the mode that best describes the newly applied drivers.

    So, if you intend to modify the SATA settings to the mode described by this release, click the download button, and make the desired changes. In addition to that, don’t forget to constantly check with our website so that you don’t miss a single new release.