Veriton M490G memory upgrade not working

Options
Yerex
Yerex Member Posts: 6

Tinkerer

S/N [edited to comply with guidelines]

Greetings, i have just purchased a used Veriton M490G. I am trying to upgrade the RAM Memory from 2 x 2GB to 2 x 4GB Mushkin DDR3 - 1333. I have tried all combinations and the comp will not recognize the new RAM.  The specs are exactly as indicated in the manual. 

After reading everything i can find in this community i now see that there is a list of compatible brands that will work for a veriton m490g. Can someone i here tell me what 4GB brands will work for this unit. 

Thank You for any assistance someone can provide. Robert

Answers

  • laurent_14
    laurent_14 ACE Posts: 10,095 Trailblazer
    Options

    Hello,

     

    Could you give me the first ten characters of the computer serial number (S/N)? Only the first ten.

    France
  • Yerex
    Yerex Member Posts: 6

    Tinkerer

    Options

    I provided the s/n but i guess the forum blocked it out. s/n PSVAP03001

  • RevoMaxx
    RevoMaxx ACE Posts: 458 Pioneer
    Options

    To try and help

     

    Memory subsystem

    Socket Type: DDR III Un-buffered DIMM connector

    Socket Quantity: 4

    2 channels, 2 DIMMs per channel.

    Different colors for DIMM 0 and DIMM 1

    1GB/2GB/4GB DDR3 1.5V 1333/1066 Un-buffered Non-ECC DIMM support

    1 GB to 16GB Max memory support

    Design Criteria:

    Must meet Intel Lynnfield and Clarkdale Chipset platform design guide

    Support 1.5V DIMM

    Dual channel should be enabled always when plug-in 2 same memory size DDRIII memory module

     

    http://www.crucial.com/usa/en/compatible-upgrade-for/Acer/veriton-m490g 

    On that site you can find all your memory. Just remember that the Ram need to run in Matched pairs. So if you only have 1 ram installed. that would need to be removed  and a New matched pair should be in place. If you can find that Memory same timings and Type for your sytem then only 1 to make a match. However for me to be safe. New best, and matching.

     

    Hope this helps

    James

  • laurent_14
    laurent_14 ACE Posts: 10,095 Trailblazer
    Options

    Yerex,

     

    Here are the original memory modules of 4Gb:

    Spoiler
    KN.4GB0B.006    DIMM.4GB.DT.DDR3-1333.SAMSUNG
    KN.4GB0B.011    DIMM.4GB.DT.DDR3-1333.SAMSUNG
    KN.4GB0H.001    DIMM.4GB.DT.DDR3-1333.UNIFOSA  
    France
  • Yerex
    Yerex Member Posts: 6

    Tinkerer

    Options

    Thanks, that was a great help from all the answers. I took your advice to my dealer and he found the right RAM for me. All setup and working fine. Thanks again!

  • laurent_14
    laurent_14 ACE Posts: 10,095 Trailblazer
    Options

    You're welcome

    France
  • RevoMaxx
    RevoMaxx ACE Posts: 458 Pioneer
    Options
    Good to hear you got things worked out.

    James