Am very frustrated-technician said I had to purchase the eRecovery recovery software-it doesn't work

Options
LLN
LLN Member Posts: 12 New User

The eRecovery software doesn't solve the problem - it stalls on the "select recovery type" - the 3 options are greyed out & the only active option is to exit. I tried 1 suggestion of "ctrl+left shift+esc" - that does nothing.  I also tried Alt+Home, which opens a screen that has "X:\windoes\system32.  But that doesn't seem to make any difference.  I'm getting absolutley no where trying to get Acer assistance.

Best Answer

  • IronFly
    IronFly ACE Posts: 18,413 Trailblazer
    Answer ✓
    Options
    You need to open your PC case and check about cables.
    If cables are well plugged, probably is a dead HDD.
    If you are not confortable on doing it, take it to a computer shop.
    I'm not an Acer employee.
«1

Answers

  • IronFly
    IronFly ACE Posts: 18,413 Trailblazer
    Options

    laptop model?

    which windows OS version it the recovery?

    I'm not an Acer employee.
  • LLN
    LLN Member Posts: 12 New User
    Options

    this is a Veriton desktop

  • LLN
    LLN Member Posts: 12 New User
    Options

    and Windows 7

  • LLN
    LLN Member Posts: 12 New User
    Options

    Veriton model X2631G

  • IronFly
    IronFly ACE Posts: 18,413 Trailblazer
    Options

    try with your HDD completly wipe or with just a NTFS partition set as primary.

    I'm not an Acer employee.
  • LLN
    LLN Member Posts: 12 New User
    Options

    I'm sorry - I don't know how to get to either of the areas you mention...Smiley Sad

  • LLN
    LLN Member Posts: 12 New User
    Options

    the "system" disc stalls on the "select restore type" - the 3 options are greyed out....

  • IronFly
    IronFly ACE Posts: 18,413 Trailblazer
    Options

    http://www.partitionwizard.com/partition-wizard-bootable-cd.html
    download the .iso file
    then use a software to burn CD/DVD or USB flash drive and burn the .iso file
    once done, put the CD/DVD/USB on your PC, boot from CD/USB (maybe you need to boot under Legacy if you have UEFI BIOS)
    press F12 at boot and choose CD or USB
    at the desktop
    select your HDD
    right click on your HDD icon and choose delete all partitions and click on yes and then apply
    http://www.partitionwizard.com/help/delete-all-partitions.html#howto

    I'm not an Acer employee.
  • JordanB
    JordanB ACE Posts: 3,729 Pathfinder
    Options

    If you can get the screen "X:\windows\system32" then wipe your drive....and then the computer will think your hard drive is brand new.

     

    http://forum.crucial.com/t5/The-Cru/Reset-your-SSD-to-factory-settings-Windows-DiskPart/ba-p/162503

     

    "Diskpart clean" works for both hard drives and solid state drives.

     

    Important Note:  The Crucial diskpart clean instructions that I've linked to work on both hard disk drives (HDD) and solid state drives (SSD).

     

     

    I'm not an Acer employee.
  • LLN
    LLN Member Posts: 12 New User
    Options

    Well, can get to the screen "X:\windows\system32".....when I go thru the other steps (list disk) it says there are no repaired disks to view..... I'm soooo lost!

  • JordanB
    JordanB ACE Posts: 3,729 Pathfinder
    Options

    You don't get anything?  Disk 0

                                        Disk 1

     

    diskpartld.PNG

    I'm not an Acer employee.
  • JordanB
    JordanB ACE Posts: 3,729 Pathfinder
    Options

    Try going in to your BIOS settings and loading the defaults (F9) and then save/exit (F10)

    I'm not an Acer employee.
  • IronFly
    IronFly ACE Posts: 18,413 Trailblazer
    Options
    When on Bios check on information tab if your HDD is listed, if not...the problem is the HDD not recognised.
    I'm not an Acer employee.
  • LLN
    LLN Member Posts: 12 New User
    Options

    The screen shows: "X:\WINDOWS\system32".....when I type dskpart then list disk it says "there are no fixed disks to show".  As I mentioned previously, I started all of this with F9/F10 before I purchased the eRecovery software.

  • LLN
    LLN Member Posts: 12 New User
    Options

    I don't see specifically "HDD" when BIOs 1st starts & when I enter the bios section there isn't an "information" tab

  • IronFly
    IronFly ACE Posts: 18,413 Trailblazer
    Options

    yep, you are correct.

     

    BIOS - Miscellaneous - Advanced

     

    please report or take a picture, what's listed under AHCI ports

     

    by the way, no fixed disk under diskpart...means that HDD is not recognised by the BIOS or system, so recovery disks can't work.

    I'm not an Acer employee.
  • LLN
    LLN Member Posts: 12 New User
    Options

    For the AHCI ports:

     Port 1:  not present

     Port 2:  not present

     Port 3: HL-DT-ST DVDRAM GHBON

  • IronFly
    IronFly ACE Posts: 18,413 Trailblazer
    Options

    ok, your HDD is dead or not connected; the Acer recovery disk can't work without an HDD.

    I'm not an Acer employee.
  • LLN
    LLN Member Posts: 12 New User
    Options

    is there a way to check or connect it?

  • IronFly
    IronFly ACE Posts: 18,413 Trailblazer
    Answer ✓
    Options
    You need to open your PC case and check about cables.
    If cables are well plugged, probably is a dead HDD.
    If you are not confortable on doing it, take it to a computer shop.
    I'm not an Acer employee.