Replaced my Aspire V5-573P touch screen digitizer

Sauceyleroux
Sauceyleroux Member Posts: 1 New User

After the install, the Acer logo appears then after about 8 seconds there are a couple lines then it goes blank. Any suggestions??IMG_1583.JPG

Answers

  • philetus
    philetus ACE Posts: 4,759 Pathfinder

    If you have or can get a remote display, connect it and see if you get good picture on it.

    You may have damaged the ribbon cable. They are pretty fragile. 

    You might open it up where you can gently  wiggle the cable while it's on and see if it changes.