Ram causing Display issues.

Options
Dale_2102
Dale_2102 Member Posts: 3 New User

I recently bought a 4gb Ram upgrade for my Aspire V5-573 Laptop, i removed the cover off the laptop, made sure no power was connected, i then installed the Ram into the laptop. As soon as i turn the laptop on after installing it the laptop turns on but there is no display. I have to have the charger plugged in for the laptop to turn on. The charging and power light comes on but there is still no display, the laptop makes a beep every 20 seconds or so. 

 

As soon as i take the RAM out, i have no display problems and i can run the laptop without the charger plugged in. 

(The RAM I recently bought) -  http://www.amazon.co.uk/Corsair-CMSO4GX3M1A1333C9-Select-Mainstream-Notebook/dp/B002YU83YO

 

I think it may have something to do with the voltage rating as the laptop states it is a 1.5v RAM slot but i think i need 1.35v

 

It is just getting frustrating now and would like some help. If i cannot solve this - I am going to buy a crucial RAM upgrade that was recomended by their scanner. 

 

Thanks

Answers

  • laurent_14
    laurent_14 ACE Posts: 10,095 Trailblazer
    Options

    Hello,

     

    1. Could you give me the first ten characters of the computer serial number (S/N)? Only the first ten.

    2. All original memory modules are DDR3L - 1600MHz
    3. The motherboard is also equipped with 4Gb of onboard memory:
      Hynix or Elpida DDR3L - 1333 or 1600MHz.
    France
  • Dale_2102
    Dale_2102 Member Posts: 3 New User
    Options

    My S/N is NXMC2EK700.

     

    Thanks for the quick reply

  • laurent_14
    laurent_14 ACE Posts: 10,095 Trailblazer
    Options

    I think you made a mistake: NXMC2EK700 instead of NXMC2EK007.

    Could you confirm the first ten characters? Thanks.

    France
  • Dale_2102
    Dale_2102 Member Posts: 3 New User
    Options

    Yes sorry, it is NXMC2EK007

  • laurent_14
    laurent_14 ACE Posts: 10,095 Trailblazer
    Options

    Your laptop supports up to 12Gb - DDR3L - 1333/1600MHz (1x8Gb + 4Gb onborad).

    In your case, here are the original memory modules:

    Spoiler
    KN.4GB04.006SODIMM.4GB.DDR3L-1600 (Micron)
    KN.4GB07.007SODIMM.4GB.DDR3L-1600 (Kingston)
    KN.4GB07.008SODIMM.4GB.DDR3L-1600 (Kingston)
    KN.4GB07.015SODIMM.4GB.DDR3L-1600 (Kingston)
    KN.4GB07.016SODIMM.4GB.DDR3L-1600 (Kingston)
    KN.4GB09.008SODIMM.4GB.DDR3L-1600 (Elpida)
    KN.4GB0C.005SODIMM.4GB.DDR3L-1600 (Adata)
    KN.4GB0G.022SODIMM.4GB.DDR3L-1600 (Hynix)

    Most memory modules are Kingston. I suggest you to buy one part from Kingston on their online shop.

    France