r7-571 display backlight works but no picture

thumper
thumper Member Posts: 2 New User

On board display is lit up but blank. External display works fine so does touch screen. Do I just need to replace the screen?

Answers

  • laurent_14
    laurent_14 ACE Posts: 10,051 Trailblazer

    Hello,

     

    Do you see something if you move slowly the onboard screen (nearly close/open and reversly)?

    France
  • thumper
    thumper Member Posts: 2 New User

    Hello Laurent 

    I gave that a try. I also removed the bottom panel to double check the connectors. Both are attached. Can the backlight still work even if there is no picture on the display? 

     

    Also thank you for the response 

  • Hello,

     

    1. I also removed the bottom panel to double check the connectors.
      Did you only remove the metal support or the back cover of the screen?

    2. Can the backlight still work even if there is no picture on the display?
      Yes if you look the attachment (yours), the IC (controllers) are independent.

    3. I would check the eDP connector directly connected on the LCD panel.
      You'll have to disassemble the screen. May be you'll need a little tutorial.
    France
  • scrambler
    scrambler Member Posts: 127 Skilled Fixer WiFi Icon

    I recently replaced the screen on an R7-572. Below it the procedure in case you need it

    http://community.acer.com/t5/S-and-R-Series/No-touch-or-digitizer-after-W10-upgrade-on-Aspire-R7/m-p/408862#M3566

     

  • padgett
    padgett ACE Posts: 4,532 Pathfinder

    Try pressing Win-P. Anything happen ?