I just bought a brand new Acer R7-572-6805. When I press power button nothing happens if AC adapter is not plugged in. I would expect laptop to start/boot because the battery inside is brand new and fully charged.
Also, I'm worried that nothing happens when I press for 4-10 seconds a battery-reset button on the bottom of the laptop in a small hole in the middle (I use paperclip).
I searched the Internet and found a few suggestions which I followed one by one, but they didn't fix the issue nor change anything.
1. Update BIOS to the newest version 2.04. Note: during flashing new BIOS version the orange LED didn't blink but shined!
2. Tightened all screws on a casing.
3. Replaced a charger.
4. Pressed batter-reset button.
5. Pressed power button for more than 10 seconds while AC adapter was plugged in, was not plugged in and when battery was not plugged in too.
4. Reinserted battery many times.
5. Checked voltage of a battery. Two cells showed 3.11V and the other two cells showed 3.81V. I manually charged the first 2 to 3.78 so that all 4 cells have similar voltage. The proper voltage makes me think that the battery is fully charged.
Other observations:
1. When AC adapter is plugged in then the orange LED is blinking (it seems to indicate that the battery is low) after approximately 6 seconds from pressing power button, i.e. from start. It doesn't change if I go to BIOS or go on with Windows boot.
2. When battery detached then the orange LED does not shine at all.
3. When AC adapter is plugged in then laptop starts.
4. Windows 8.1 is installed. The first time I used the laptop I plugged AC adapter in, powered on the laptop and went on with the installation.
5. Wall AC outlet provide 230V in my country (in contrast to 110V in US, but it shouldn't matter becuase the charger is capable of working in both systems according to its specification).
Do you experienced the same issue? Do you probably have any idea of what might fix the issue?
