ATC-705-UC52 won't boot, can't get to aetup

PhilBert
PhilBert Member Posts: 1 New User
edited March 2023 in 2017 Archives
Shut down PC last night normally. Now won't boot past Aspire logo screen. Tried various F buttons like F2 to get into setup but don't eve see msg re going to setup.
Windows 10 no new hardware.
Hard drive activity sluggish and slow.
Not sure how to get into setup other than F keys.
Please advise.
Worked in tech for 30' years. Don't think I have bootable disk but will look after posting

Answers

  • IronFly
    IronFly ACE Posts: 18,413 Trailblazer

    you can try Alt+F10 keys too to check if you are able to enter windows recovery.

     

    can be a bad HDD, so you can try to disconnect it from the SATA cable and check if pressing F2, you are able to reach BIOS screen.

     

    about bootable disk, you can easily create a bootable USB flash drive:

     

    1) download a windows 10 iso using Microsof tool:
    http://go.microsoft.com/fwlink/?LinkId=691209
    select the proper windows 10 version (the same installed on your laptop) and choose to save it as iso file when prompted
    2) download Rufus:
    http://rufus.akeo.ie/?locale=en_US
    plug your USB flash drive, run Rufus then:
    select ISO image from the dropdown menu near "Create a bootable disk"
    click on the little icon on the right and browse to the windows 10 downloaded iso file
    as Partitions scheme select "GPT partition scheme for UEFI"
    as File system select "FAT32"
    click on Start
    wait until it finish, then uplug your USB flash drive
    3) backup all your personal data
    4) Reboot to BIOS, pressing F2 at boot, then press F9 to load default and F10 to save and exit
    5) plug your USB flash drive and at boot press F12 (if F12 doesn't work, see if it auto-recognise the USB flash drive or press F2 to enter BIOS and enable F12 boot menu under BOOT tab), choose the USB flash drive as bootable device
    6) proceed with windows 10 installation

    I'm not an Acer employee.