using recovery disks

tourglide · ‎02-20-2013

I have replaces the HDD on an aspire 3502 laptop and every time I install the recovery disks, it will allow me to get to the very end of the install where it says Recovery complete, remove disk and reboot computer. When I do, I get the message "OS not found". I can't remember if the recovery disks came with a separate windows xp disk or not but at no time during the recovery install does the system ask for the windows product key. The old HDD is useless for any information on the partioned part of the drive. The machine will not do anything with the old drive installed. Any help would begreatly appreciated.

Acer-Cory · ‎02-25-2013

You wouldn't have to put in any product keys if you're using the Acer recovery disks. If the Acer Recovery process finishes without error, I'm not sure where the issue is. A couple suggestions would be to go into the BIOS and load the default setup and make sure you don't have something like a printer or Flashdrive connected that is interfering with the boot process.

Remember to mark posts that resolved your issue with Accept as Solution. You can even mark multiple posts in a single thread. This will make it easier for others to find the same information. Use the Give Kudos button to offer a thumbs-up for good post content and a pat on the back to the author.

2013 Archives

This page has been archived.

Tema

using recovery disks

Re: using recovery disks

Bem Vindos

Você sabia?