The content on this page may be out-of-date or have been superseded by newer information, and links on this page to other sites may not work.
This page has been archived for future reference.
See our Discussion Forums for more current content.
The original Seagate 750GB disk installed in my computer has failed. I have a new WD Black disk on which I'd like to install Windows 7. Other computer manufacturers allow you to chose/set the boot device. How can I do that on this computer?
1. Take the 2 screws out of the side cover (Panel).
2. Take off the front face plate.
3. unscrew the 2 screws on the bracket.
4. slide the bracket up and pull off wires.
Your done the reverse order to re-install. if you need pictures reply back.