Iconia Tab W500

thicon6 · ‎11-29-2012

I have an Acer Iconia Tab W500 and I am having problems with top of the screen not responding to touch. I've tried recalibrating and still does not respond. Whenever I touch the top left or center the pointer shows up to the far righ corner. If I tap below the top everything is ok. Any suggestions?

Acer-Tommy · ‎12-03-2012

Calibration is the optimal solution, which you have attempted.

The only recourse at this point would be to check with your local service or customer care center for assistance.

Acer Service and Support

Important Links: Global Support Pages | Knowledge Base Articles
Remember to mark posts that resolved your issue with Accept as Solution. You can even mark multiple posts in a single thread. This will make it easier for others to find the same information. Use the Give Kudos button to offer a thumbs-up for good post content and a pat on the back to the author.

nicholsonma · ‎12-03-2012

My experience with my W510 is the exact opposite. My touch screen was working OK but missing some touches so I decided to run the calibration from the Tablet PC Settings in Control Panel. After I did this almost nothing worked with touch until I clicked Reset in Tablet PC Settings to delete my calibration data.

2012 Archives

This page has been archived.

Tema

Iconia Tab W500

Re: Iconia Tab W500

Re: Iconia Tab W500

Bem Vindos

Você sabia?