1.Altos R380F3有兩種Onboard RAID模組,一個是INTEL onboard SATA RSTe RAID,一個是INTEL onboard SATA ESTII RAID
其各支援的功能不一樣,如下表
2.如何選擇要用哪一種onboard RAID?
步驟說明如下,在第5步驟處即可選要用哪一種RAID模組
1. Please press F2 to enter BIOS Setup during POST.
2. Please press F9 to load default BIOS settings.
3. In Main Page, change Quiet Boot from Enabled to Disabled.
Quiet Boot [Disabled]
1. In Advanced Page, select Mass Storage Controller Configuration
2. Please select the SATA port that is connecting to the HDD desired.
SATA Port 0-5(請點選進去看,有沒有抓到HDD,若沒有,就不是連接這個介面)
sSATA Port 0-3(請點選進去看,有沒有抓到HDD,若沒有,就不是連接這個介面)
3. You might see below information:
AHCI Capable SATA Controller [AHCI]
4. Please change the setting of AHCI Capable SATA Controller from AHCI to RAID Mode.
AHCI Capable SATA Controller [RAID Mode]
5. Change the setting of AHCI Capable RAID Options from INTEL(R) ESRT2 (LSI*) to INTEL (R) RSTe
AHCI Capable RAID Options [INTEL (R) RSTe]--->或是選ESRT2
4. Save the setting and exit from BIOS Setup
3.選完要用哪一種模組後,還要再指定是要用EFI Mode或是Legacy Mode來做RAID設定
如何指定用哪一種Mode做設定,其步驟如下:
1. Please press F2 to enter BIOS Setup during POST.
2. In Boot Maintenance Manger Page, select Advanced Boot Options
3. You would see below information.
Boot Mode [Legacy]
4. To enable EFI mode, please change the setting from Legacy to UEFI.
Boot Mode [UEFI]
5. To enable legacy mode, please change the setting to Legacy.
Boot Mode [Legacy]
6. Save the setting and exit from BIOS Setup.
4.使用EFI Mode設定RAID ,是不會在開機畫面中有快速鍵產生;但是若使用Legacy Mode來設定RAID,將會在開機畫面出現快速鍵導引進入RAID BIOS做設定
RSTe RAID快速鍵是：CTRL+I
ESRT2 RAID快速鍵是：CTRL+E
