AP130F2 "Intel" Onboard SATA Software RAID支援哪些作業系統及哪些RAID Type?
1.Intel Onboard SATA software RAID 支援哪些RAID功能?
Ans:請參考下方表格資料
NOTE 1. Not every OS can support disk space up to 2 TB.
NOTE 2. When RAID volume is created, it can be initialized on the background. RAID volume can be immediately available without completing the fully initialization.
NOTE 3. Drive coercion refers to the ability of the RAID controller to recognize the size of the physical drives that are connected and then force the larger drives to use only the amount of space available on the smallest drive. Drive coercion as implemented in these RAID controllers also allows an option to map out a reserved space to compensate for slightly smaller drive sizes that may be added later. It is 64 MB by default and cannot be changed.
NOTE 4. More information of NCQ can be found at:
http://www.serialata.org/technology/ncq.asp
NOTE 5. OS must be installed in Legacy mode on AP130 F2 with Intel Onboard SATA RAID.
2. Intel Onboard SATA software RAID 支援哪些作業系統?
Ans: 請參考下方表格資料
3.如何開啟Intel onboard SATA RAID?
Ans: 在開機過程中按F2進入BIOS.
a. 請先做 load default BIOS settings(F9).
b. 請選取Advanced.
c. 請選取SATA Configuration.
d. 你可看到以下資訊:
SATA Controller [Enabled] SATA Mode [AHCI Mode]
e. 請更改 change SATA Mode從AHCI Mode 到 RAID Mode.
SATA Mode [RAID Mode]
f. 請按F10存檔並離開即可.
