1.如何開啟Onboard Intel SATA RAID 功能?
Ans:
Please enter BIOS Setup during POST.
a. Please load default BIOS settings.
b. Please select Advanced.
c. Please select IDE/SATA Configuration.
d. You might see below information:
SATA#1 Configuration [Compatible]
Configuration SATA#1 as [IDE]
SATA#2 Configuration [Enhanced]
e. Please change Configure SATA#1 as from Compatible to RAID.
Configuration SATA#1 as [RAID]
f. Please change ICH Raid CodeBase from Adaptec to Intel.
g. Please save the setting and exit from BIOS Setups
2.如何進入RAID Config設定畫面?
Ans: After you enable the Intel onboard SATA software RAID, please press CTRL-I when you see below
messages during POST.
Intel(R) Matrix Storage Manager option ROM v8.9.1.1002 ICH10R/DO wRAID5
Copyright(C) 2003-08 Intel Corporation. All Rights Reserved.
RAID Volumes: * = Data is Encrypted
ID Name Level Strip Size Status Bootable
0 VOlume0 RAID5(Parity) 64KB 1863.0GB Normal Yes
Physical Disks:
Port Drive Model Serial # Size Type/Status(Vol ID)
0 ST31000333AS 5TE0061Q 931.5GB Member Disk(0)
1 ST31000333AS 5TE01KSJ 931.5GB Member Disk(0)
2 ST31000333AS 5TE006QJ 931.5GB Member Disk(0)
Press to enter Configuration Utility...
