Acer
Predator
ConceptD
Planet9
Altos R360F4 如何設定ONBOARD SATA ESRTII RAID - Acer Community
<main> <article class="userContent"> <p>Enabling Onboard SATA ESRTII RAID</p><p>ESRT2 is only supported in UEFI mode</p><p>1. Please press F2 to enter BIOS Setup during POST.</p><p><br></p><p>2. Please press F9 to load default BIOS settings.</p><p><br></p><p>3. In Main Page, change Quiet Boot from Enabled to Disabled.</p><p><br></p><p>Quiet Boot [Disabled]</p><p><br></p><p>4. In Advanced Page, select Mass Storage Controller Configuration</p><p><br></p><p>5. Please select the SATA port that is connecting to the HDD desired.</p><p><br></p><p>SATA Port 0-5</p><p><br></p><p>sSATA Port 0-3</p><p><br></p><p>6. You might see below information:</p><p><br></p><p>AHCI Capable SATA Controller [AHCI]</p><p><br></p><p>7. Please change the setting of AHCI Capable SATA Controller from AHCI to RAID Mode.</p><p><br></p><p>AHCI Capable SATA Controller [RAID Mode]</p><p><br></p><p>8. Keep the setting of AHCI Capable RAID Options as INTEL(R) ESRT2 (LSI*).</p><p><br></p><p>AHCI Capable RAID Options [INTEL(R) ESRT2 (LSI*)]</p><div class="embedExternal embedImage display-large float-none"> <div class="embedExternal-content"> <a class="embedImage-link" href="https://us.v-cdn.net/6029997/uploads/migrated/acer_final/65637/F201910034.jpg" rel="nofollow noreferrer noopener ugc" target="_blank"> <img class="embedImage-img" src="https://us.v-cdn.net/6029997/uploads/migrated/acer_final/65637/F201910034.jpg" alt="F201910034.jpg" height="180" width="320" loading="lazy"></img></a> </div> </div> <p><br></p><p>9. Save the setting and exit from BIOS Setup</p><p><br></p><p>Set Onboard SATA ESRTII RAID in EFI Mode</p><p><br></p><p>4. Please press F2 to enter BIOS Setup during POST.</p><p><br></p><p>5. In Boot Maintenance Manger Page, select Advanced Boot Options</p><p><br></p><p>6. You would see below information.</p><p><br></p><p>Boot Mode [Legacy]</p><p><br></p><p>7. To enable EFI mode, please change the setting from Legacy to UEFI.</p><p><br></p><p>Boot Mode [UEFI]</p><p><br></p><p>8. Save the setting and exit from BIOS Setup.</p><p><br></p><p>UEFI Mode</p><p><br></p><p>Entering Onboard SATA ESRTII RAID BIOS Utility (EFI Mode)</p><p><br></p><p>Please press F2 to enter BIOS Setup during POST. In BIOS Setup, select Advanced > PCI Configuration > UEFI Option ROM Control > Embedded Server RAID Technology 2 (SATA) to configure Onboard SATA ESRTII RAID in EFI mode.</p><div class="embedExternal embedImage display-large float-none"> <div class="embedExternal-content"> <a class="embedImage-link" href="https://us.v-cdn.net/6029997/uploads/migrated/acer_final/65637/F201910034-1.jpg" rel="nofollow noreferrer noopener ugc" target="_blank"> <img class="embedImage-img" src="https://us.v-cdn.net/6029997/uploads/migrated/acer_final/65637/F201910034-1.jpg" alt="F201910034-1.jpg" height="180" width="320" loading="lazy"></img></a> </div> </div> <p><br></p><p> </p><p>2. Select Create Configuration.</p><p><br></p><p>3. In Create Configuration menu, select RAID Level, Drives, and Virtual Drive Size.</p><p><br></p><p>4. Select Save Configuration</p><p><br></p><p>5. Select OK.</p><p><br></p><p>6. Press ESC to back to Configuration Options.</p><p><br></p><p>Initializing a RAID Volume (EFI Mode)</p><p><br></p><p>1. Select Virtual Drive Management from Configuration Options.</p><p><br></p><p>2. Select Select Virtual Drive Operations.</p><p><br></p><p>3. Select Fast Initialization from Select Operation option.</p><p><br></p><p>4. Select Start Operation.</p><p><br></p><p>5. Select Yes.</p><p><br></p><p>6. Select OK.</p><p><br></p><p>7. Press ESC to back to Configuration Options.</p><p><br></p><p>Assigning a Hot Spare Drive (EFI Mode)</p><p><br></p><p>1. Select Drive Management from Configuration Options.</p><p><br></p><p>2. Select Select Drive Operations.</p><p><br></p><p>3. Select desired drive from Select Drive option. It is usually the drive in “Unconfigured Good” status.</p><p><br></p><p>4. Select Assign Global Hot Spare Drive from Drive Operation option.</p><p><br></p><p>5. Select Start Operation.</p><p><br></p><p>6. Select OK.</p><p><br></p><p>Saving and Exiting Onboard SATA ESRTII RAID Configuration Utility (EFI Mode)</p><p><br></p><p>1. When RAID configuration, initialization and assigning hot spare are completed, press F10 to save and exit.</p><p><br></p><p>2. Now you can start to install OS.</p><p><br></p><p><br></p><p>9. Save the setting and exit from BIOS Setup</p><p><br></p><p>Set Onboard SATA ESRTII RAID in EFI Mode</p><p><br></p><p>4. Please press F2 to enter BIOS Setup during POST.</p><p><br></p><p>5. In Boot Maintenance Manger Page, select Advanced Boot Options</p><p><br></p><p>6. You would see below information.</p><p><br></p><p>Boot Mode [Legacy]</p><p><br></p><p>7. To enable EFI mode, please change the setting from Legacy to UEFI.</p><p><br></p><p>Boot Mode [UEFI]</p><p><br></p><p>8. Save the setting and exit from BIOS Setup.</p><p><br></p><p>UEFI Mode</p><p><br></p><p>Entering Onboard SATA ESRTII RAID BIOS Utility (EFI Mode)</p><p><br></p><p>Please press F2 to enter BIOS Setup during POST. In BIOS Setup, select Advanced > PCI Configuration > UEFI Option ROM Control > Embedded Server RAID Technology 2 (SATA) to configure Onboard SATA ESRTII RAID in EFI mode.</p> </article> </main>
