1. Press the M7922F76-MR locking levers in the direction of the arrows as illustrated in the following image.
2. Pull the M7922F76-MR Memory Riser out of the chassis.
Memory slot population
3. Press the memory slot locking levers in the direction of the arrows as shown in the following illustration.
4. Align the memory module with the slot. When inserted properly, the memory slot locking levers lock automatically onto the indentations at the ends of the module.
●The Intel® Xeon® E7-4800 & E7-8800 v3/v4 series processors design with 8 memory risers and 12 DIMM per riser up to a total of 96 DDR4 slots
●This platform supports up to 3,072GB RDIMM/ 6,144GB LRDIMM/ 12,288GB LRDIMM 3DS*
●DDR4 RDIMM/LRDIMM 1866 MHz w/ ECC (1.2V) when 2DPC/1DPC @ lockstep mode;
●DDR4 RDIMM/LRDIMM 1600 MHz @ performance mode
●DDR4 RDIMM/LRDIMM 1600/1333 MHz w/ ECC (1.2V) when 3DPC @ lockstep & performance modes
●All installed memory will automatically be detected. No jumpers or settings need to be changed for memory detection.
●All memory must be of the same type and density.