ES13-331-C8A1 : upgrade Hard disk (32 Go) + RAM ?

fm76
fm76 Member Posts: 3 New User

Hello,

is it possible to replace my original HD (32 Go) too small and repalce the 2 Go of RAM by 4 Go of RAM

What model of SSD and RAM can I installed ?

Thanks for reply.

FM

Answers

  • laurent_14
    laurent_14 ACE Posts: 10,050 Trailblazer

    Hello,

     

    1. Your laptop is equipped with eMMC of 32Gb which is directly soldered on the motherboard.
      If you remove the bottom (only 12 screws), could you take a picture around the fan area?
      May be you'll be able to add a HDD for your personal data.
    2. It supports up to 8Gb - DDR3L - 1600MHz (1x8Gb in single channel).
      1. Original memory modules
        Spoiler
        KN.4GB07.023SODIMM.DDR3L.1600.4GB (Kingston)
        KN.4GB0G.029SODIMM.DDR3L.1600.4GB (Hynix)
        KN.8GB07.022SODIMM.DDR3L.1600.8GB (Kingston)
        KN.8GB0B.030SODIMM.DDR3L.1600.8GB (Samsung)
        KN.8GB0G.022SODIMM.DDR3L.1600.8GB (Hynix)
      2. Compatible memory modules:
        PNY
    France
  • fm76
    fm76 Member Posts: 3 New User

    Hello Laurent,

    thanks for your reply.

    Francois

  • fm76
    fm76 Member Posts: 3 New User

    Hello Laurent,

    thanks for reply.

    The ES13 has been supported by a computer store.

    They have tested a 8Go RAM DDR3L and it seems to be OK.

    A new HD SSD of 240Go Kingston is awainting delivery.

    Your are right the 32Go is welded on the mother board but there is a available slot for additional SSD.

    Problem for OS: what is best solution ?

    1) A windows extend of 32Go of C:\ to 32Go + 240 new SSD ?

    2) Reinstall OS of C: and Software + Documents on D: drive ?

    3) Clone the 32Go to 240Go, in BIOS activate the boot to 240Go (not sure it will be possible) and the reformat the original 32Go

    Not sure in BIOS we can disable the 32 GO drive

    Thanks for help

    Francois