-
Connecting Acer Liquid Jade Primo to a monitor or television
How can I connect my Acer Liquid Jade Primo to my telivision or computer monitor? You can use the Acer Liquid Jade Primo display dock to connect your smartphone to a computer monitor or television set. * Connect your Jade Primo display dock to the AC power adapter. * Use an HDMI cable to connect your Jade Primo display…
-
Unable to turn change Overdrive setting on Acer FreeSync monitor
Why am I not able to turn on the Overdrive setting on my Acer monitor? Overdrive is enabled by default when your Acer monitor is connected via DisplayPort with FreeSync enabled. This means you will not be able to change Overdrive settings within the monitors On-Screen Display (OSD) menu. Note: Overdrive can be enabled or…
-
Acer USB Type-C Dock support for multiple monitors
Can I connect two monitors to my Acer USB Type-C dock? The USB Type-C Dock supports connecting two displays for a multiple monitor setup. The HDMI and Display port on the dock can support dual monitors up to 2560x1600 at 60 Hz.
-
Achieving 144Hz refresh rate on XB270 and XB271 monitors
Can my Acer Predator XB270 or XB271 monitor get a 144Hz refresh rate via HDMI? Your Predator XB270 or XB271 monitor can only use a 144Hz refresh rate via display port connection. If you are connecting your monitor with HDMI, the maximum refresh rate you will receive is 60Hz.
-
Do I need to install a driver for my monitor?
Do I need to install a driver for my monitor? Windows will automatically detect your monitor and use a built in plug and play (PnP) driver to provide the supported resolutions in most cases. Plug and play monitors usually do not need a separate monitor driver. For Acer monitors that have features that are not supported by…
-
Acer monitor has magnetic base
Why is there an image of a paperclip on my Acer monitor stand? Some Acer monitors have a magnet located inside the base to allow you to store paperclips or attach metal items to your base for safe keeping. The magnetic area on the base is indicated by a paperclip icon as shown in the image below.
-
Assembly of the Predator XB271 Monitor stand
How do I put together the Predator XB271 monitor stand? The Predator XB271 monitor stand rotates and locks into place with a thumb screw. Once the stand is assembled properly, the monitor will rotate on the base. Use the instructions and pictures below to see the proper alignment of the stand for assembly. The neck and…
-
Multiple monitor support for the Acer Predator AG9-591 and AG9-791
How many monitors can I connect to the Predator AG9-591 and AG9-791? You can connect up to three external displays on the Predator AG9-591 and AG9-791. You will need to use a third party USB-C video adapter to connect the third external display to the USB-C port. This will allow a total of four viewing screens. Note:…
-
Check the firmware version of your monitor
How can I tell what firmware version my monitor has? Use the following steps to check the firmware version of your monitor: * Power off monitor. * Press and hold the empowering button + Power button. * Keep holding BOTH buttons. * Release the power button when the desktop appears and immediately release and press the…
-
Troubleshooting monitor power issues
What can I do if my Acer monitor will not power on? Power issues can sometimes be resolved with troubleshooting. Other power issues are the result of hardware failure and require repair. Your Acer monitor may fail to turn on for any of the reasons listed below. * A static electricity build-up. * A disconnected AC adapter…