-
What RAID features can MegaRAID 9240-4i support?
請參考以下表格
-
Lsi MegaRAID 9240-4i相關資訊
1.How many SAS ports does MegaRAID 9240-4i support? Ans:MegaRAID 9240-4i features one mini SAS 4i connectors (SFF-8087) and can support 4 SAS ports (6Gbps). 2.Does MegaRAID 9240-4i support software RAID or hardware RAID? Ans:Hardware RAID. 3.What OS can MegaRAID 9240-4i support? Ans:請參考以下表格 5.Where should I connect the SAS…
-
Lsi MegaRAID 9240-4i有沒有OS Level的管理程式?
1.What RAID utility does MegaRAID 9240-4i support? Ans: MegaRAID Storage Manager for Windows & Linux. 2. Where can I find the RAID utility of MegaRAID 9240-4i? Ans: The RAID utility can be found at Smart Setup DVD.
-
Can I install both SAS and SATA HDD on AR380 F1 with MegaRAID 9240-4i?
在AR380上,使用MegaRAID 9240-4i RAID Card,可以同時安裝SAS and SATA HDD ? Ans: 是的,可以,但是建議相同規格的硬碟做一個RAID Volume,不要混接,如:有四顆HDD,兩個SAS HDD ,兩個SATA HDD,建議 SATA HDD *2做一個RAID ,另一個SAS HDD*2做一個RAID,不建議同一個RAID Volume中一顆SAS HDD+一顆SATA HDD
-
How do I create RAID 10 with MegaRAID 9240-4i?
Ans: For configuring RAID 10, you need 4 HDDs in the system. Please follow the procedures below. a. To start the RAID BIOS utility, please press CTRL-H during POST b. After POST finished, the Adapter Selection page will display on the screen. Click on Start to launch the configuration menu c. Please select Adapter…
-
MegaRAID 9240-4i有支援指示硬碟位置的功能嗎?
MegaRAID 9240-4i有支援指示硬碟位置的功能嗎? Ans:是的,有!!你可以透過RAID Utility in windows/linux軟體或是從RAID BIOS中指示出實體硬碟所在位置,這是方便在判定RAID HDD哪一顆硬碟有問題時使用上的方便性 當你指出硬碟時,硬碟的activity燈號將會是閃爍的琥珀色 註：但若該硬碟是hotspare角色時,將不會閃爍
-
我如何使用HDD Location function判定硬碟位置?
我如何使用HDD Location function判定硬碟位置? You can identify the physical HDD or the virtual drive through the RAID BIOS utility during POST or RAID utility in Windows/Linux. • RAID BIOS utility: a. Please press CTRL-H to start the RAID BIOS utility during POST b. In the Home page, click on the physical or logic HDD that you want to…
-
How do I check the event log of MegaRAID 9240-4i?如何把log檔存起來?
1.How do I check the event log of MegaRAID 9240-4i? Ans: The event log of MegaRAID 9240-4i can be checked from bottom control panel of RAID utility. 2.如何把log檔存出來? ANSWER: The RAID utility support the feature to save event log information to a file. Please follow the procedures below. a. Please launch the RAID utility in…
-
假設在MegaRAID 9240-4i利用兩顆HDD做RAID1,有一顆fail後,安裝一顆hdd進去後,為何不會自動rebuild?要如何處理?
當在MegaRAID 9240-4i設定兩顆硬碟做RAID 1,且沒有hotspare情況下,當有一顆HDD有問題,拔除硬碟後再重新插入原本的硬碟,RAID不會自動Rebuild,這顆HDD會被RAID Utility設定為(Foreign) Unconfigured Bad,如下圖!要如何讓他做Rebuild呢? Ans: 1.請不要使用原本舊的HDD做Rebuild,應該是更換一顆全新的硬碟,或者若沒有全新的硬碟,請把原本被判定有問題的HDD拿到別的Raid card上面,針對HDD做clear/delete RAID configuration 的資料,這樣系統才不會因為原本的硬碟內有RAID Config資料而不能做rebuild…
-
What RAID features can MegaRAID 9260-8i support?
MegaRAID 9260-8i SAS RAID Card有哪些功能? 請參考以下表格說明
