-
MegaRAID 9260-8i support 管理程式是哪一個?如何取得?
1.What RAID utility does MegaRAID 9260-8i support? ANSWER: MegaRAID Storage Manager for Windows & Linux. 2. Where can I find the RAID utility of MegaRAID 9260-8i? ANSWER: 這個RAID 管理程式可到本公司官方網站上下載專區進行下載
-
我可以同時接SAS 及SATA HDD 在MegaRAID 9260-8i RAID Card上嗎?
Ans: 是的,可以,但是請把相同規格的硬碟規劃在同一個RAID Volume中,如 系統共有四顆硬碟,兩顆SAS HDD,兩顆SATA HDD, 你需要將SAS HDD 做成一個RAID1,SATA HDD做成一個RAID 1,請不要混接兩種規格不一樣的硬碟在同一個RAID Volume上
-
如何在MegaRAID 9260-8i建立RAID 10?
Ans: 要作RAID 10,至少要有4顆硬碟(留意,請不要將SAS HDD跟SATA HDD混接) 請參考以下步驟即可規劃RAID 10 a. To start the RAID BIOS utility, please press CTRL-H during POST b. After POST finished, the Adapter Selection page will display on the screen. Click on Start to launch the configuration menu c. Please select Adapter Properties to set Factory Defaults…
-
如何在MegaRAID 9260-8i建立RAID 50?
Ans: 要規劃RAID 50, 至少要有6顆硬碟 Please follow the procedures below. a. To start the RAID BIOS utility, please press CTRL-H during POST b. After POST finished, the Adapter Selection page will display on the screen. Click on Start to launch the configuration menu c. Please select Adapter Properties to set Factory Defaults from No…
-
在MegaRAID 9260-8i RAID管理程式中看到BBU disabled 錯誤訊息,這是說明什麼問題?
如果在MegaRAID Card的RAID Utililty(管理程式)看到以下訊息,其問題所在是? Controller ID: 0 BBU disabled; changing WB logical drives to WT Ans: The warning message means BBU (i.e. battery) is disabled and Write Policy is changed from Write Back to Write Through. That could be due to BBU charging status is not completed, or BBU failure
-
如何利用RAID Card 上的HDD location function來找出實體哪一個硬碟發生問題?
How do I identify the HDD with the HDD location function? Ans: You can identify the physical HDD or the virtual drive through the RAID BIOS utility during POST or RAID utility in Windows/Linux. 當硬碟被點選到時,其硬碟的activity LED燈將會閃琥珀色燈號 • RAID BIOS utility: a. Please press CTRL-H to start the RAID BIOS utility during POST b. In…
-
MegaRAID 9260-8i 預設Write Cache功能是?
1.預設值的write cache是? Ans: The default setting of disk data cache is Unchanged. 我如何開啟/關閉 MegaRAID 9260-8i的disk write cache ? Ans: 請依以下步驟. a. Please press CTRL-H to start the RAID BIOS utility during POST b. In the Home page, click Virtual Driver that you want to enable/disable disk write cache. c. Then, enable/disable disk…
-
How do I check the event log of MegaRAID 9260-8i?
Ans: The event log of MegaRAID 9260-8i can be checked from bottom control panel of RAID utility.
-
如何將MegaRAID 9260-8i的LOG檔存出來?
Ans: The RAID utility support the feature to save event log information to a file. Please follow the procedures below. 1. Please launch the RAID utility in Windows/Linux. 2. Right click one of the event log in the bottom control panel, and select Save Log Text 3. Select the directory for saving the event log file, and…
-
在MegaRAID 9260-8i RAID card上做RAID 1,要如何才能進行Rebuild?
問題: MegaRAID 9260-8i is configured with 2 x HDD as RAID 1 without hot spare. But, when I removed one HDD and inserted the original HDD back, the RAID cannot be rebuilt automatically. In the RAID Utility, it indicates the HDD as (Foreign) Unconfigured Bad. Ans: Please insert a new HDD which was not configured as RAID. Or,…
