-
如何查看系統的EVENT LOG?
如何查看系統的EVENT LOG? Ans: 請在開機過程中按下F2進入BIOS a.請選取Server Management. b. 請選取Event Log Configuration. c. 請選取View Smbios Event Log. 即可看到系統Event Log
-
如何存取3041E-R RAID Card的log?
如何存取3041E-R RAID Card的log? Ans: 請參考以下步驟 a. 請開啟RAID utility b. 按滑鼠右鍵,選取:Save as Text c. Select the directory for saving the event log file, and click Save button. d. The event log file will be saved in text format
-
如何設定3041E-R的enable/disable disk write cache ?
如何設定3041E-R的enable/disable disk write cache ? 如何設定3041E-R的enable/disable disk write cache ? Ans: 請依以下步驟設定 a. 請開啟RAID utility b. 點選 Logical panel中的Virtual Drive c. 點選 Operations d. Select Set Virtual Disk Properties e. Select Disk Cache Policy and click Go
-
SAS RAID (3041E-R ) 規格介紹說明
SAS RAID (3041E-R ) 規格介紹說明 1.3041E-R SAS RAID支援哪些RAID 功能? Ans:請參考下表 NOTE 1. There is no SGPIO connector for 3041E-R. NOTE 2. Not every OS can support disk space up to 2 TB. NOTE 3. Drive coercion refers to the ability of the RAID controller to recognize the size of the physical drives that are connected and then force the…
-
AR320F2 SAS Back-plane規格說明
AR320F2 SAS Back-plane規格說明 1.AR320F2 SAS Back-plane支援哪些規格的硬碟? Ans:請參考下表 2.因AR320F2 HDD背板是SAS規格,硬碟是不是有規定規格? Ans:沒有,SATA 跟 SAS HDD都可以安裝 3.若安裝SAS HDD並使用是Onboard SATA Software RAID,這樣抓得到HDD嗎? Ans: 很抱歉,不能這樣搭配!! SAS Back-Plane可以裝SAS HDD及SATA HDD,但是後端的RAID Controller,若要使用onboard SATA software RAID,就一定只能安裝SATA HDD.這點請特別留意…
-
AR320F2 Power Supply 規格及功能說明
AR320F2 Power Supply 規格及功能說明 Power Supply 規格及功能如下: NOTE 1. With OCP, the power supply and power distribution board combination (PS+PDB) shall shutdown and latch off after an over current condition occurs. NOTE 2. With OVP, the power supply and power distribution board combination (PS+PDB) shall shutdown and latch off after…
-
LSI Onboard SATA software RAID預設是write cache or write back?如何更改設定?
LSI Onboard SATA software RAID預設是write cache or write back?如何更改設定? LSI Onboard SATA software RAID預設是write cache or write back?如何更改設定? Ans:預設 disk write cache是disable的. 所以你可以透過 RAID BIOS utility (Ctrl-M)去更改設定值 選取Objects--> Adapter,你可以更改Disk WC Off/On 為 disable或enable disk write cache 選取 Objects-->選取 Virtual Drive-->選取…
-
在LSI Onboard SATA software RAID 可以只接一顆HDD做RAID Configure?
Ans: 是的,可以Yes.
-
如何查看Lsi onboard SATA software RAID firmware版本?如何進入Configure畫面視窗?
如何查看Lsi onboard SATA software RAID firmware版本?如何進入Configure畫面視窗? 1.如何查看Lsi onboard SATA software RAID firmware版本? Ans:若BIOS中LSI Onboard SATA RAID確定被enable(啟用),在開機過程中就會看到如下畫面 In this example, the firmware version is A.10.04201645R. 2.如何進入Configure畫面視窗? Ans:如上畫面中,有提示指令為:Ctrl-M
-
在Intel Onboard SATA Software RAID上可以只針對一顆HDD做RAID?
在Intel Onboard SATA Software RAID上可以只針對一顆HDD做RAID? Ans:很抱歉,不行,至少要兩顆以上才能進行RAID Configure
