-
Integrated RAID Module RMS3CC080支援HDD位置點燈功能嗎?
Ans:是的,只要透過RAID 管理程式,是可以針對HDD做點燈的動作 當你指定點選某一顆硬碟時,該硬碟的activity indicator燈,將會出現閃爍琥珀色 註：Global 或 Dedicated Hotspares的硬碟,是無法點亮的
-
如何在integrated RAID Module RMS3CC080建立RAID10?
Ans: To configuring RAID 10, you need 4 HDDs in the system. Please follow the procedures below. a. To start the RAID BIOS utility, please press CTRL-R during POST b. In the top menu, please press Ctrl-N to switch to Ctrl Mgmt page. c. Press Tab to move the cursor to Set Factory Defaults and then press Enter. d. Select OK…
-
請問可以同時裝SAS及SATA HDD在integrated RAID Module RMS3CC080上嗎?
Ans:是的,是可以的,但是要把這兩種規格的HDD硬碟分別建置RAID,不能在同一個RAID Volume中有兩種規格的硬碟
-
Altos R360F3 integrated RAID Module RMS3CC080 的管理程式是哪個?
Ans:管理程式是 RAID Web Console 2 for Windows & Linux,可以在隨機附贈的Resource DVD中找到
-
Altos R360F3 integrated RAID Module RMS3CC080如何設定RAID(在EFI Mode下)
一 、如何確定Boot Mode是在EFI Mode? Set RAID Controller in EFI Mode or Legacy Mode 1. Please press F2 to enter BIOS Setup during POST. 2. Please press F9 to load default BIOS settings. 3. In Main Page, change Quiet Boot from Enabled to Disabled. Quiet Boot [Disabled] 4. In Boot Maintenance Manger Page, select Advanced Boot Options…
-
Altos R360F3 integrated RAID Module RMS3CC080如何設定RAID(Legacy Mode)?
一、在Legacy Mode下的設定 A.如何確定機器設定在Legacy Mode? 1. Please press F2 to enter BIOS Setup during POST. 2. Please press F9 to load default BIOS settings. 3. In Main Page, change Quiet Boot from Enabled to Disabled. Quiet Boot [Disabled] 4. In Boot Maintenance Manger Page, select Advanced Boot Options 5. You would see below…
-
我如何得知integrated RAID Module RMS3CC080的bios及FW版本?
Ans: You would see below integrated RAID Module RMS3CC080 related information during POST: In this example, the BIOS version is 6.17.04.0, and the firmware package version is 24.3.0-0032. NOTE. This POST information of the integrated RAID Module RMS3CC080 would be available for both UEFI mode and legacy mode on Altos R360…
-
Altos R360F3 integrated RAID RMS3CC080 的SAS Cable要接在哪?
Ans: Please connect the SAS cable to mini SAS HD connector (SFF-8643) on the card
-
Altos R360F3 integrated RAID Module RMS3CC080 支援哪些作業系統?
請參考下表
-
Altos R360F3 integrated RAID Module RMS3CC080支援幾個SAS Ports?
Ans: 8 SAS ports (12 Gbps).
