-
如何設定IP給BMC(Smart Console)使用?
Ans: Smart Console use the same IP address with BMC. You can configure the BMC IP address in BIOS setup. Please enter BIOS Setup during POST. a. Please select Server Management. b. Please select BMC LAN Configuration. c. You would see information below. Baseboard LAN configuration IP Source [Static] IP Address…
-
Altos R360 F3 的Smart Console要如何接線才能運作?
Ans: Altos R360F3在BMC的連接上,支援兩種網路的連接介面,以及兩種網路連接模式 • Shared (Default): BMC is connected to onboard Gigabit LAN 1 and LAN 2 port. • Dedicated (Optional): BMC is connected to optional dedicated server management port. (RMM4 Dedicated Server Management PORT is required to support Dedicated NIC) For connection mode: • Concurrent…
-
Altos R360 F3 Smart Console 支援指定的網路孔?
Ans: 是的,可以支援,只要你有加裝RMM4,就可以指定特定的網路孔 這樣也代表,此台機器的Smart Console可以是透過指定的網路孔,也可以是與系統的網路孔共用
-
選配的 RMM4 Lite是裝在哪裡?
RMM4 Lite安裝在主機板上,請參考下圖
-
Smart Console有哪些功能?
Smart Console有哪些功能,請參考下表 NOTE 2. Onboard LAN port 1 and LAN port 2 can be configured for failover for Smart Console. NOTE 3. RMM4 Lite is required to support KVM over IP and Media Redirection NOTE 4. The function is through KVM over IP and Media Redirection (e.g. Remote FDD). NOTE 5. There is not much commands provided by…
-
什麼是Smart Console?
Ans: With Smart Console + RMM4 Lite, Altos R360 F3 can support KVM over IP, media redirection (remote FDD, Remote CD-ROM drive) and remote power control. The Smart Console is integrated in Altos R360 F3. However, some feature like KVM over IP requires the installation of RMM4 Lite.
-
有兩顆HDD在integrated RAID Module RMS3CC080上做RAID1,有一顆FAIL後,如何做Rebuilt?
有兩顆HDD,在integrated RAID Module RMS3CC080 做RAID1,沒有hot Spare 但當我們抽掉一顆HDD並將該顆HDD再放回系統中,RAID並不會自動做Rebuilt. 在RAID Utility中看到該顆HDD被視為 (Foreign) Unconfigured Good 發生此狀況時,請放入一顆全新的HDD或是未被建置過RAID的HDD 或者是將該顆HDD放到其他有RAID的系統去,將其清除乾淨後,再放回這台系統 這樣子,系統就會自動Rebuilt 如果你只是重新插拔原本在系統上的HDD,那RAID 會將該HDD當做“Foreign" 這樣子的話,你必需依以下步驟去將該HDD回復成RAID成員 a.…
-
如何查詢integrated RAID Module RMS3CC080的event log? 如何儲存Log?
在RAID Utility中,如下圖畫面,其畫面下方就是event log 如何儲存Log? 請依下方步驟 a. Please launch the RAID utility in Windows/Linux. b. Right click one of the event log at the bottom and select Save as Text c. Select the directory for saving the event log file, and click Save button. d. The event log file will be saved in text format
-
Altos R360F3 integrated RAID Module RMS3CC080的預設Write Cache設定是?如何更改?
預設的Write Cache是Unchanged.如下圖 如何更改設定? Ans:可以透過RAID Utility或是RAID BIOS去做修改 一、RAID Utility a. Please launch the RAID utility in Windows/Linux. b. Right click the Virtual Drive in Logical panel c. Click Set Virtual Drive Properties d. In the pop-up Set Virtual Drive Properties dialog-box, enable/disable disk cache from Disk…
-
請問如何針對某顆硬碟做點燈指定的動作?
Ans: 要點選某顆HDD的動作,可以在RAID BIOS中做,也可以在RAID Utility中做 • RAID BIOS utility: a. Please press CTRL-R to start the RAID BIOS utility during POST b. In the PD Mgmt page, move the cursor to the physical HDD that you want to locate. Then, press F2. Select the “Locate” option and select “Start”. • RAID utility in Windows/Linux: a.…
