Shlomi93 New User

Comments

  • THE PROBLEM SOLVED BY REPLACING THE BIOS CHIP AND DEACTIVATE THE ATI GRAPHIC CARD THROUGH THE DRIVER MANAGER.
  • Loading setup defaults doesn't help. but I'm curios, why does the A3 bios doesn't show in the "Latest" section ? I will try in 2 weeks (very busy these days..) to update the bios to A3 and post here results.
  • There are no chipset drivers and this didn't solve it. It might be a hardware failure. do you have any idea where can I get Z3-605 schematic ?
  • If I rest the bios with the jumper and then trying a few times power on and off then PC will boot up and will get into bios and even to windows but if I shut it down and try to turn on then black screen again and need to rest bios and keep trying until it will boot again. I've just flashed the bios again and same thing.…
  • Actually in the bios I didn't see the flash drive but windows booted with the "Please Wait" screen and from there I was able to get command prompt and tried to flash the bios using files from official Acer website. it didn't work because I have windows 10 and the bios files compatible with Windows 8.1 command prompt so I…
  • Ok, so did that and still the same situation. the PC sometimes turn on and sometimes not. I think that if I'm resting its power by taking the CMOS out + power cord out for 5 min then the PC turn on but once I shut it down, it will stay on black screen until the next power rest. I thought to flash bios again through USB…
  • Ok, did that and now I'll wait, but just to be sure, 3 hours is good enough?
  • No, I returned the HDD and same thing. I will try the CMOS rest but I've tried that already but not in the same way that you said. I just took the CMOS battery and waited for 1-2 min like in any desktop PC and then placed the battery back.. why do I have to wait few hours for the rest ?
Avatar