-
Hardest Tempered Monsters in Monster Hunter: Wilds
Monster Hunter Wilds introduces a variety of new enemies, including a unique octopus-like creature not seen in previous games. However, the toughest fights in the game come from the Tempered Monsters.
What is a Tempered Monster?
Tempered monsters are tougher, more aggressive versions of regular monsters found only in High Rank (achieved after you kill Zoh Shia) of Monster Hunter Wilds. They have enhanced health, strength, and speed, making each encounter significantly more challenging. These creatures have survived numerous battles, which is reflected in their more powerful attacks and unpredictable behavior. In addition, tempered monsters drop rare materials used to craft end game weapons and armor, making them a vital target for endgame hunters.
In this article, we’ll cover the strongest Tempered Monsters you can face in Monster Hunter Wilds and why they’re the hardest challenges for any veteran hunter.
7. Rathalos
Tempered Rathalos is one of the tougher bosses in the game, but it ranks at the bottom of this list because, with over 20 types of Tempered Monsters in the game, it faces some stiff competition. While its enhanced strength, higher health, and more aggressive behavior make it a formidable opponent, it doesn’t quite reach the level of challenge that some of the other tempered monsters provide. Rathalos’ fiery breath, explosive fireballs, and poison-inflicting tail are all dangers you’ll need to manage carefully.
The tail is particularly troublesome, as it automatically inflicts poison damage with each strike. The best approach is to chop it off, but doing so requires getting in close, which leaves you exposed to other attacks. While the fight is tough, it’s relatively predictable compared to other tempered monsters, which makes it a little less overwhelming.
So, while a Tempered Rathalos is still a challenge, its position at the bottom of this list reflects the variety of even more demanding tempered monsters in Monster Hunter Wilds. Being on this list still marks it as one of the tougher fights in the game—just not quite the hardest.
6. Guardian Ebony Odogaron
The Tempered Guardian Ebony Odogaron is a unique and challenging fight. This artificial creation, imbued with the power of Ebony Odogaron, is a dangerous opponent, especially in its Tempered form. Its aggressive nature is heightened by the Guardian energy, making it a relentless adversary. Found in the Ruins of Wyveria, it uses its sharp claws to inflict bleeding and a dexterous tail capable of triggering explosive dragon-element attacks when it makes contact with Wylkrystals.
One of the key threats in this battle is the Guardian Ebony Odogaron's tail, which can swing and slam with devastating force, while its jumping spin and tail whip combo are deadly if you’re caught off guard. Its projectile attack, fired from the ground, leaves orange markings where the blast will hit, forcing hunters to stay mobile. The monster’s ability to inflict Dragonblight can negate weapon elements and ailments, adding an extra layer of complexity to the fight. Managing Dragon Resistance and Blight Resistance is crucial to surviving the encounter.
The Guardian Ebony Odogaron is also known for its high-speed attacks, making it a more unpredictable fight. While its moves are powerful, they are still somewhat predictable with experience. Properly managing bleeding and using items like Well-Done Steak, Wild Jerky, or Bleeding Resistance will help you avoid the worst of the damage. With a little preparation and careful positioning, the Guardian Ebony Odogaron can be defeated, but it remains one of the more intense tempered monsters you’ll face in the game.
5. Jin Dahaad
Jin Dahaad is the giant king that rules the Iceshard Cliffs, and its Tempered version is one of the toughest monsters you’ll face. This massive creature can traverse walls and frozen surfaces with ease, thanks to the frost it emits from its limbs. While it’s a challenging fight, its arena is filled with destructible environmental traps that can be used to deal massive damage. Once you become familiar with the map and its features, the fight becomes much more manageable. For players unfamiliar with Jin Dahaad or the arena, however, it can present significant challenges.
The monster’s body is covered in ice-producing ridges, which serve both as defense and offense. These ridges are vulnerable to Cut and Blunt damage, and destroying them will weaken the creature, opening up opportunities to attack. But it’s Jin Dahaad’s Crystallize move that truly makes it terrifying. When hit by this attack, especially in its Tempered form, it’s essentially a one-shot kill, making it a crucial moment to avoid at all costs.
Jin Dahaad also has the ability to inflict Iceblight and Frostblight, both of which can drain your stamina and freeze you in place, respectively. To manage this, you’ll need items like Nulberry and Cleanser, or better yet, increase your Ice Resistance and Blight Resistance to make the fight easier.
The battle against Jin Dahaad is intense, with attacks like Freezing Breath and Freezing Jet that can cause widespread damage and inflict Frostblight. However, the arena’s environmental traps provide opportunities to turn the tide in your favor. You can use the destructible boulders to deal massive damage or as cover from his larger-scale attacks. Though Jin Dahaad’s moves are powerful, his predictable patterns and the map’s resources give hunters who are familiar with the terrain a strategic advantage.
4. Uth Duna
Uth Duna is a powerful fat aquatic lizard that feeds on the Scarlet Forest. This creature, often encountered during the downpour, is protected by a water-absorbing veil that not only absorbs attacks but also adds weight, making its body slams and wave attacks even more destructive. However, once this veil is removed, Uth Duna becomes more agile and aggressive, raising the stakes significantly.
The fight is further complicated by Uth Duna’s unique water-based attacks, such as the Twisted Body Slam and Underwater Dive. Both create large AoE waves of water that deal significant damage, but they are dodgeable with quick evasion or the use of Wedge Beetles to gain some vertical space. In its tempered version, he is likely to two-shot you with any of its attacks.
When it comes to dealing damage, Uth Duna’s Forelegs and Head are key weak spots, with the head being particularly vulnerable to Blunt damage. Using Thunder Ammo or Thunder Pods is also effective against Uth Duna’s elemental weakness to Thunder. Managing Waterblight is also critical, as it slows stamina recovery, but this can be countered with Nulberry, Water Resistance, or Blight Resistance.
Additionally, the Scarlet Forest arena has destructible environmental traps specifically made to counter Uth Duna (just like Jin Dahaads arena). As Uth Duna moves through the water, these traps can be triggered to collapse on the monster. Successfully hitting Uth Duna with one of these traps forces it out of the water early, preventing it from continuing its path or performing a devastating wave attack.
3. Rey Dau
Residing in the Windward Plains, Rey Dau has adapted to the Sandtide and uses the intense storms to amplify its already deadly Thunder-based attacks. This territorial creature will attack any intruders on sight, making it a highly aggressive and unpredictable foe. Its ability to store, amplify, and discharge lightning makes every move potentially lethal.
Tempered Rey Dau’s most dangerous ability is its Lightning Burst which can one-shot hunters if you’re not careful. The Lightning Burst can be used while Rey Dau is flying or on the ground, and while it’s not too complicated to dodge, it requires good reaction time to avoid the lethal burst.
In addition, be wary of Rey Dau’s arm attacks, such as Earth Slice and Arm Sweep. While Earth Slice is relatively easier to dodge, Arm Sweep is much more challenging to avoid and can catch you off guard.
Rey Dau’s ability to generate fulgurite from its wings and tail further amplifies its threat. When Rey Dau’s charged appendages touch the ground, the resulting fulgurite increases its attack range and charging capacity. Breaking these appendages is crucial to limiting Rey Dau's offensive capabilities. After it discharges electricity, its head becomes vulnerable, offering an opening for hunters to land powerful blows.
Rey Dau is weak to both Water and Ice, so weapons with these elements are particularly effective. Using Water Ammo or Ice Pods can significantly increase your damage output, and skills like Critical Element and Charge Master can further enhance elemental attacks.
Unlike most monsters, Rey Dau is immune to Shock Traps, so if you want to capture it, you'll need to use Pitfall Traps, which take longer to set up but are effective in immobilizing this powerful wyvern.
2. Arkveld
Residing across all five biomes, Tempered Arkveld, the monster on the game’s box art, is a legendary flying wyvern once thought extinct. This monster wields a unique chain-like blade on its wings that can extend and retract freely, allowing it to feed on elemental energy and unleash devastating Dragon-element attacks. Its ability to absorb and convert energy makes every move unpredictable and highly dangerous.
Arkveld’s arsenal is built around its Chainblade assaults. Moves like Chainblade Assault, Red Lightning Blast, and Crossed Wingblade create explosive, wide-range attacks that can potentially one-shot hunters if you’re caught off guard. Its long-chain attacks are amplified by the energy it absorbs; when its wings and chainblades are charged, they can sweep out to cover a massive area. To counter this, focus on its weak spots—the Head, Wings, and Chainblades—which are vulnerable to Cut, Blunt, and Elemental damage.
Arkveld’s dynamic fighting style allows it to switch between aerial strikes and ground-based attacks seamlessly. It can quickly reposition itself using its mighty wings and chainblades to latch onto the ground, launching devastating moves such as Tail Upswing and Arm Strikes that may leave you exposed. Additionally, its moves often carry the threat of Dragonblight, which negates your elemental attacks; be prepared with Nulberry or boost your Dragon Resistance and Blight Resistance to mitigate these effects.
Effective strategies include flooding Arkveld with continuous Dragon-element attacks, which help overload its energy-absorbing organs. Exploiting its brief vulnerabilities—such as after a discharge when its head becomes exposed—can provide crucial openings for your most powerful blows.
Tempered Arkveld is a well-rounded monster, capable of both relentless offense and sturdy defense. While its attacks are potent and can be explosive, understanding its patterns and focusing on its weak points will give you the edge needed to bring down this frankenstein monster, the second strongest challenge on the list.
1. Gore Magala
Residing in the Iceshard Cliffs, Tempered Gore Magala is the ultimate terror in Monster Hunter Wilds. Draped in a cloak of pitch-black wings and lacking traditional eyes, it instead uses a scattering of fine wing scales to sense its prey. When these scales reach a critical threshold, antennae emerge and Gore Magala unfurls its wings to enter a frenzied state, transforming into an even more aggressive predator.
In this Frenzy State, Gore Magala unleashes a suite of devastating attacks—such as Aerial Dive, Frenzy Arc, and Frenzy Projectile—that not only inflict massive damage but also spread the dangerous Frenzy Virus. Initially, this virus appears as Frenzy: Onset, serving as a warning; however, once fully contracted, it increases the damage you take and halts natural healing, turning every moment of the fight into a high-stakes battle.
One of the reasons this battle is so challenging is the tight, confined spaces found in parts of the Iceshard Cliffs. These smaller areas leave little room for evasive maneuvers, forcing hunters into close quarters with this relentless predator and amplifying its devastating attacks.
The key to surviving this onslaught is to target Gore Magala’s vulnerable areas. Damaging its Head and Antennae can disrupt the spread of the Frenzy Virus and expose its inner defenses, allowing you to land powerful, decisive blows. Elemental attacks are also crucial in this fight. Gore Magala is particularly weak to Fire—using Flaming Ammo or Torch Pods can significantly reduce its defenses—while Thunder and Dragon elements can also be effective if timed correctly against its rapid, unpredictable strikes.
Ultimately, facing Tempered Gore Magala is the pinnacle of challenge in Monster Hunter Wilds. With its ability to induce Frenzy not only in itself but also in nearby creatures, it transforms the battlefield into a chaotic arena of relentless assaults. Mastery of evasive maneuvers, pinpoint targeting of weak spots, and the strategic use of elemental strengths are all essential to overcoming this Demi Elder Dragon.
Level up your play with Acer’s game-changing gear. Whether you're after the latest hardware or affordable devices, Acer's got you covered. Check out our top gaming products and unleash your true gaming potential today!
Recommended Products
Nitro V 15
Buy Now
Nitro V 14
Buy Now
-
10 Must-Know Tips for Beginners in Monster Hunter: Wilds
Monster Hunter: Wilds (MH Wilds), the latest iteration of the long-lasting Monster Hunter Series, can seem overwhelming at first. However, with the right strategies in hand, you can quickly build a strong foundation for success on your hunts. Here are 10 essential tips to help you navigate the world of Wilds.
1. Master your weapons (but don’t overwhelm yourself)
Begin by choosing one primary weapon to focus on. Each weapon—from the agile Sword and Shield to the powerful Hammer or versatile Switch Axe—has its own unique rhythm and combo chains. Spending time in the training area will help you develop muscle memory and learn the intricacies of your chosen weapon. Once you feel confident, consider selecting a secondary weapon that offers a contrasting playstyle, such as a ranged option, to give you flexibility during combat encounters.
2. Master the map and navigation tools
Efficient navigation is critical in a game as expansive as Monster Hunter: Wilds. Familiarize yourself with the dynamic map, setting waypoints and filtering essential icons like pop-up camps and resource nodes. Learning how to quickly traverse the landscape with the map’s quick-navigation options will save time and help you plan your hunts more effectively, reducing the chances of getting lost in the wild.
3. Build a flexible loadout
Creating a well-organized loadout in your base camp is key to success. A good loadout typically includes healing items like potions and mega potions, status cures such as nulberries, and specialized tools like traps and tranq bombs for capturing monsters. Having these essentials readily available not only saves time during quests but also ensures you’re prepared for unexpected challenges while out in the field.
4. Utilize your Seikret mount wisely
Your Seikret mount is more than just a means of fast travel. It’s a tactical asset that can be used to avoid danger and reposition yourself during combat. When you’re vulnerable—such as while healing, sharpening your weapon, or simply needing to gain distance from a monster—mount your Seikret to quickly escape harm’s way. Additionally, the Seikret’s supply pouch offers a handy cache of consumables, providing you with extra support when you need it most.
5. Explore and exploit the environment
The world of Wilds is filled with environmental cues and interactive objects that can give you a significant advantage. Keep an eye on the on-screen list of items like herbs, monster parts, and even natural hazards that you can use to your benefit. For example, you can lure two giant monsters near each other and have them both fight each other in an epic duel!
6. Learn the art of crafting
Crafting is a fundamental aspect of Wilds that you shouldn’t overlook. By gathering ingredients from your surroundings, you can create potions, traps, and even custom meals that grant powerful temporary buffs lasting up to 50 minutes. Experimenting with different ingredient combinations at your portable BBQ can tailor your buffs to the specific challenges of your hunt, giving you an edge over tougher monsters.
7. Experiment with different weapon playstyles
While it’s important to master a primary weapon, exploring other options in the training area is invaluable. Testing weapons such as the Long Sword for precise strikes or the Light Bowgun for agile, ranged combat will help you understand each weapon’s strengths and limitations. This experimentation not only builds your overall combat versatility but also prepares you to adapt your strategy based on the elemental weaknesses or behaviors of various monsters.
8. Customize your settings for maximum clarity
Adjusting your in-game settings can make a world of difference. Increasing the camera distance provides a wider field of view, allowing you to better track enemy movements and environmental hazards. Tweaking focus mode sensitivity and rearranging the user interface to reduce clutter will improve your situational awareness, enabling you to respond more quickly to threats and opportunities during hunts.
9. Don’t forget about your Palico
Your Palico is more than just a cute companion; it’s a reliable partner in battle. As your Palico levels up, it gains abilities that can provide crucial buffs, offer healing support, or even revive you during critical moments. Upgrading your Palico’s gear and understanding its role can greatly enhance your survivability, especially during tougher encounters where every bit of assistance counts.
10. Capture, don’t always kill
One of the smarter strategies for beginners is to focus on capturing monsters rather than always opting for a kill. Capturing a monster can often end a hunt more efficiently and, in many cases, yield rarer materials and rewards than simply defeating it. When a monster is sufficiently weakened, use traps and tranq bombs to safely capture it. This approach minimizes resource expenditure and reduces the risk of prolonged, dangerous battles while increasing your chances of obtaining valuable, hard-to-find items.
Level up your play with Acer’s game-changing gear. Whether you're after the latest hardware or affordable devices, Acer's got you covered. Check out our top gaming products and unleash your true gaming potential today!
Recommended Products
Orion 5000
Buy Now
Nitro 60
Buy Now
-
Best Way to Farm Tranq Bombs, Shock Traps, and Pitfall Traps in Monster Hunter: Wilds
Why capturing monsters is important
Capturing monsters in Monster Hunter Wilds (MH Wilds) is an essential skill every hunter should master. Unlike simply slaying a monster, capturing ends the fight sooner, offers greater rewards, and significantly boosts your chances of acquiring rare materials critical for crafting powerful gear.
Signs a monster is ready for capture
Knowing when a monster is ready for capture is crucial. Common signs include:
* Limping away from combat.
* Heavy drooling or visibly exhausted behavior.
* Retreating to their nest to rest.
* A skull icon appearing on the mini-map (if tracking is active).
* Your Palicoes verbally indicating the monster looks weak.
How to capture a Monster in MH Wilds
When a monster is weakened, first set your trap (Shock or Pitfall) in its path. Once the monster triggers and is immobilized by the trap, quickly approach its head and throw two Tranq Bombs before it can escape. Alternatively, you can throw or shoot two Tranqs at the monster first and then lure it into your trap. However, this second method carries a risk of missing with your traps. For the safest and most reliable approach, always trap first.
Items needed for capturing monsters
Three key items make monster capturing possible: Tranq Bombs, Shock Traps, and Pitfall Traps.
* Tranq bombs (Sleep Herb + Parashroom): These are throwable tranquilizers used to put a monster to sleep. However, Tranq Bombs alone won't immobilize a monster. They must be used in combination with traps for successful capturing. Tranq Bombs can also be turned into Tranq Ammo and Tranq Blade for different weapon types.
* Shock traps (Trap Tool + Thunderbug Capacitor): These quick-setup electric traps immobilize most monsters for a brief period, usually around 8-10 seconds. Their rapid deployment makes them perfect for capturing fast or aggressive monsters on the fly.
* Pitfall traps (Trap Tool + Net): Slightly slower to deploy, Pitfall Traps create a hidden pit that traps monsters for a longer duration compared to Shock Traps. Crucially, Pitfall Traps can capture monsters immune to electric-based traps, such as Rey Dau and Gypceros, making them invaluable for specific hunts. Pitfall Traps are crafted from Trap Tool and Net, with the Net itself crafted from Ivy and Spider Web.
Choosing between shock traps and pitfall traps
When deciding between Shock and Pitfall traps, consider your prey carefully. If speed and versatility are your priorities, Shock Traps offer the quickest option as Pitfall traps take longer to set up. However, when hunting specific monster that are resistant or immune to electricity, Pitfall Traps are your only option.
How to effectively farm Tranq Bombs, Shock Traps, and Pitfall Traps in MH Wilds
1. Maximizing your farming efficiency
Before setting out to farm, you'll want to maximize the amount of materials you can gather per run. Specifically, you're aiming to collect Sleep Herbs, Parashrooms, Ivy, Spider Webs, and Thunderbugs. Remember, Trap Tools can be infinitely purchased at your base camp, so there's no need to farm these.
To optimize your gathering efficiency, you'll want the Botanist skill at Level 4. Here's how the Botanist skill enhances your material collection:
* Level 1: Gather one extra consumable herb per collection.
* Level 2: Additionally, gather one extra consumable fruit, nut, or seed per collection.
* Level 3: Additionally, gather one extra consumable insect per collection.
* Level 4: Additionally, gather one extra consumable mushroom per collection.
Having Botanist Level 4 directly increases your yields of Sleep Herbs, Parashrooms, Ivy, and Spider Webs. Without the skill active, you normally collect:
* 2x Sleep Herbs
* 2x Parashrooms
* 2x Ivy
* 1x Spider Web
With Botanist Level 4, you’ll gain an additional +1 item per gather, significantly boosting your overall material yield each time you farm.
2. How to best farm Tranq Bombs
Tranq Bombs are crafted from two items: Sleeping Herbs and Parashrooms. To farm these items effectively, you will need access to both Windward Plains and the Scarlet Forest.
To farm Sleeping Herbs, set up a pop-up camp at “Area 10: Southeast.” Be careful when setting up here, as large monsters often patrol the area and can destroy your camp. Once you arrive at Area 10: Southeast, you will find three different Sleeping Herb plants available for farming. To the left of the pop-up camp is a small cliff overlooking the river; head to the edge of the cliff where you will see two Sleeping Herb plants that you can easily obtain using your grappling hook. After collecting these, head north to grab the final Sleeping Herb.
In the Scarlet Forest, set up a pop-up camp at “Area 8: South Campsite.” Just outside the camp, you will find three Parashrooms. Once you collect these shrooms, quickly return to Windward Plains to farm more Sleeping Herbs, and repeat the process.
This method is the fastest way to farm materials for Tranq Bombs. Each run takes about one to one and a half minutes and yields 9 Sleeping Herbs and 9 Parashrooms, which is enough to craft 9 Tranq Bombs. Remember that the collectible items have a cooldown time of over 10 minutes, but leaving the area—such as moving from Windward Plains to the Scarlet Forest—will reset the timer.
3. How to best farm Shock Traps
Shock Traps are easier to farm because the Trap Tool component required to make them can be purchased from a vendor at Base Camp, meaning you only need to farm Thunderbugs. Thunderbugs are scattered throughout Windward Plains, but they are most commonly found in Area 1 near Base Camp. Leave Base Camp and ride into Area 1 to start collecting the bugs using your grappling hook.
Alternatively, for an even more efficient run, you can increase the number of Thunderbugs by venturing into Windward Plains when Rey Dau is present and a huge sandstorm is occurring. During a sandstorm, the number of Thunderbugs essentially doubles, and Great Thunderbugs also appear; catching them automatically grants you a Shock Trap.
This run takes about 5-7 minutes, and you can collect around 8 Thunderbugs in a regular run or over 15 during a sandstorm.
4. How to best farm Pitfall Traps
Pitfall Traps are more complicated to farm than Shock Traps because you need to gather two crafting items—Spider Web and Ivy—instead of one. The best way to farm Ivy is to head to the Scarlet Forest and set up a pop-up camp at “Area 18: West.” Just outside the camp, you will find two Ivy plants, which yield a total of 6 Ivies.
For Spider Webs, there are two methods available in the Scarlet Forest. The first method is to set up a pop-up camp at “Area 7: Bower of the Great Tree Campsite” and then head straight to the spider den to collect 3 Spider Webs. The second method is to start from Base Camp and take the long way to the spider den; along the way, you can collect an additional 2 Spider Webs, making for a total haul of 5 Spider Webs (which equals 15 Webs total with Level 3 Botanist skill).
This run lasts about 3–5 minutes, and you can obtain 6 Pitfall Traps (Option 1) or 6 Pitfall Traps along with 4 extra Spider Webs left over (Option 2).
Happy Hunting!
By following the tips provided in this guide, you can optimize your farming runs, making the most of your time and resources. Whether you’re farming for Sleep Herbs, Parashrooms, Thunderbugs, Ivy, or Spider Webs, each run can yield valuable materials that will keep you well-stocked for future hunts. Remember to use your Botanist skill to maximize your yield, and always adapt your strategy based on the monster you're hunting. With practice, you’ll be capturing monsters like a seasoned pro, securing rare materials, and enhancing your gear to take on even the toughest challenges in Monster Hunter Wilds. Happy hunting!
Level up your play with Acer’s game-changing gear. Whether you're after the latest hardware or affordable devices, Acer's got you covered. Check out our top gaming products and unleash your true gaming potential today!
Recommended Products
Predator Orion 5000
Buy Now
Nitro 60
Buy Now
-
All Dices and Their Probabilities in KCD2
Farkle aka the dice game is a game of luck and strategy in KCD2 where you roll to score points, aiming to reach the target (usually 2000 points) before your opponent. Every turn is a balance between playing it safe and pushing your luck for bigger rewards.
How to play Farkle in KCD2
1. Turn structure
* Roll six dice.
* Set aside at least one scoring die or combination.
* Decide:
* Bank your points and end your turn.
* Roll again with the remaining dice for more points—but risk losing everything if no valid combination appears (bust).
If you bust, you lose all points from that round and your turn ends.
2. Scoring system
You earn points by rolling certain numbers or combinations:
Single Dice Scores
* 1 → 100 points
* 5 → 50 points
Three of a Kind (The more, the better!)
* Three 1s → 1,000 points
* Three 2s → 200 points
* Three 3s → 300 points
* Three 4s → 400 points
* Three 5s → 500 points
* Three 6s → 600 points
Bonus Rule: Rolling more than three of a kind doubles the points for each extra die. Example: Four 2s = 400 points, Five 2s = 800 points
Straight Runs (Sequences)
* 1-5 → 500 points
* 2-6 → 750 points
* 1-6 → 1,500 points
3. Special Rules & Strategies
* The Devil’s Head (Wild Die): This acts as a joker, meaning you can use it as any number to complete a combination.
* Loaded Dice: Some dice, bought from shopkeepers, have special properties—like making it more likely to roll certain numbers. These can tilt the odds in your favor!
4. Badges
Badges are special items that add extra mechanics to the dice game. You can earn them from looting or purchasing from traders.
How Badges Work:
* Players choose one badge before the match.
* Some game modes require a badge to play.
* In certain matches, losing means giving up your badge along with the bet.
Badge Rarity Tiers:
* Tin (Common)
* Silver (Uncommon)
* Gold (Rare & Powerful!)
Badges can alter dice rolls, provide special abilities, and completely change the game's strategy. If you're serious about winning, collecting and using the right badges is key!
All dices and their probabilities in KCD2
Dice come in many forms, each with unique properties that can influence the outcome of the game. Some dice are fair, while others are loaded to favor specific numbers or combinations. Understanding the probabilities of each die can give you an edge, whether you're playing cautiously or taking calculated risks. Below is a breakdown of all dice and their probabilities.
Aranka's Die
Aranka gave me this die to make it easier for me to play against her husband. This loaded die has a better chance of rolling even numbers.
* 1 → 28.6%
* 2 → 4.8%
* 3 → 28.6%
* 4 → 4.8%
* 5 → 28.6%
* 6 → 4.8%
Cautious Cheater's Die
A die modified by an expert. It is precisely loaded, but also inconspicuous. The unique die has a better chance of rolling a 1 or a 5.
* 1 → 23.8%
* 2 → 14.3%
* 3 → 9.5%
* 4 → 14.3%
* 5 → 23.8%
* 6 → 14.3%
Ci Die
The second in the line of the demonic dice, she likes to get lost, but when she's with her sisters she's very strong. This loaded die has an equal chance to roll numbers 1 to 5 and has a high chance to roll a 6.
* 1 → 13%
* 2 → 13%
* 3 → 13%
* 4 → 13%
* 5 → 13%
* 6 → 34.8%
Devil's Head Die
A die that feels hot to the touch. In place of a one, it has a devil's head, which is not something folk like to gaze upon…
* 1 → 16.7%
* 2 → 16.7%
* 3 → 16.7%
* 4 → 16.7%
* 5 → 16.7%
* 6 → 16.7%
Die of Misfortune
They say that when it rains, it pours. But if you play with this die, the only thing pouring will be your tears. The weight value that is loaded on this die has a higher chance of rolling side values two, three, four, and five.
* 1 → 4.5%
* 2 → 27.7%
* 3 → 27.7%
* 4 → 27.7%
* 5 → 27.7%
* 6 → 4.5%
Even Die
A die loaded in favour of even numbers.
* 1 → 6.7%
* 2 → 26.7%
* 3 → 6.7%
* 4 → 26.7%
* 5 → 6.7%
* 6 → 26.7%
Favourable Die
A playing die that brings luck more often than you'd expect. This loaded die is capable of rolling mostly a one or a five, it also has a chance to roll a 6.
* 1 → 33.3%
* 2 → 0%
* 3 → 5.6%
* 4 → 5.6%
* 5 → 33.3%
* 6 → 22.2%
Fer Die
The third and last in the line of demonic dice. The Fer Die is described to be the last in the line of the demonic dice, this unique die has a high chance of rolling a six.
* 1 → 13%
* 2 → 13%
* 3 → 13%
* 4 → 13%
* 5 → 13%
* 6 → 34.8%
Greasy Die
A more reliable die than a normal one, but it cannot be relied on for everything. The Greasy Die is described as a "reliable" die, it has better chances of rolling a one, three, five, and six.
* 1 → 17.6%
* 2 → 11.8%
* 3 → 17.6%
* 4 → 11.8%
* 5 → 17.6%
* 6 → 23.5%
Grimy Die
One could say it will get you out of the frying pan into the fire. And sometimes it will let you stew in your own juice. This loaded die has a higher chance of rolling a two or five.
* 1 → 6.2%
* 2 → 31.2%
* 3 → 6.2%
* 4 → 6.2%
* 5 → 43.7%
* 6 → 6.2%
Grozav's Lucky Die
It is actually not all that lucky, but don't tell anyone!
* 1 → 6.7%
* 2 → 66.7%
* 3 → 6.7%
* 4 → 6.7%
* 5 → 6.7%
* 6 → 6.7%
Heavenly Kingdom Die
A miraculous die, sent down from the Heavenly Kingdom to earth.
* 1 → 36.8%
* 2 → 10.5%
* 3 → 10.5%
* 4 → 10.5%
* 5 → 10.5%
* 6 → 21.1%
Holy Trinity Die
A consecrated die commemorating the Holy Trinity, especially by rolling threes. A special die that is inspired by the Holy Trinity, it is a die that is weighted towards mostly rolling the side value of three.
* 1 → 18.2%
* 2 → 22.7%
* 3 → 45.4%
* 4 → 4.5%
* 5 → 4.5%
* 6 → 4.5%
Hugo's Die
A die of the most loyal regular at the Hole. It bears his likeness. This loaded unique die is most likely to roll any side value.
* 1 → 16.7%
* 2 → 16.7%
* 3 → 16.7%
* 4 → 16.7%
* 5 → 16.7%
* 6 → 16.7%
King's Die
An anointed head has no need of a loaded die, since he is always right and can never lose. The King's Die has a better chance of rolling side values two, three, and four.
* 1 → 12.5%
* 2 → 18.7%
* 3 → 21.9%
* 4 → 25%
* 5 → 12.5%
* 6 → 9.4%
Lousy Gambler's Die
A shoddy loaded die. It's quite noticeably unbalanced. This die is heavily weighted to roll a four and is less likely to roll a one or three.
* 1 → 10%
* 2 → 15%
* 3 → 10%
* 4 → 35%
* 5 → 15%
* 6 → 15%
Lu Die
The first in the line of demonic dice. This unique die favors rolling a six.
* 1 → 13%
* 2 → 13%
* 3 → 13%
* 4 → 13%
* 5 → 13%
* 6 → 34.8%
Lucky Die
When fortune smiles on you, smile back. Otherwise, you'll look suspicious. This die is loaded to favor rolling ones and sixes.
* 1 → 27.3%
* 2 → 4.5%
* 3 → 9.1%
* 4 → 13.6%
* 5 → 18.2%
* 6 → 27.3%
Mathematician's Die
A die loaded based on the work of a forgotten mathematician. It may be better suited to solving equations than playing dice. This die has a low chance of rolling fives and sixes.
* 1 → 16.7%
* 2 → 20.8%
* 3 → 25%
* 4 → 29.2%
* 5 → 4.2%
* 6 → 4.2%
Molar Die
A die made out of a molar tooth. It's probably better not to know who it came from. This is a regular die that is most likely to roll any side value.
* 1 → 16.7%
* 2 → 16.7%
* 3 → 16.7%
* 4 → 16.7%
* 5 → 16.7%
* 6 → 16.7%
Odd Die
A die loaded to favor odd numbers. Most of the time.
* 1 → 26.7%
* 2 → 6.7%
* 3 → 26.7%
* 4 → 6.7%
* 5 → 26.7%
* 6 → 6.7%
Ordinary Die
An ordinary playing die. A starting die that is most likely to roll any side value.
* 1 → 16.7%
* 2 → 16.7%
* 3 → 16.7%
* 4 → 16.7%
* 5 → 16.7%
* 6 → 16.7%
Painted Die
One of the dice colored using modern techniques that hide the attempt to load it. This die has a high chance of rolling a five and also favors rolling a one or six.
* 1 → 18.7%
* 2 → 6.2%
* 3 → 6.2%
* 4 → 6.2%
* 5 → 43.7%
* 6 → 18.7%
Pie Die
Doesn't look particularly tasty, but it's well-balanced towards lower numbers.
* 1 → 46.2%
* 2 → 7.7%
* 3 → 23.1%
* 4 → 23.1%
* 5 → 0%
* 6 → 0%
Premolar Die
A playing die made from a premolar tooth. Just like the Molar Die, this die is most likely to roll any side value.
* 1 → 16.7%
* 2 → 16.7%
* 3 → 16.7%
* 4 → 16.7%
* 5 → 16.7%
* 6 → 16.7%
Sad Greaser's Die
A blue die mirroring the sadness of its original owner. This die is loaded to roll values one, two, and five.
* 1 → 26.1%
* 2 → 26.1%
* 3 → 4.3%
* 4 → 4.3%
* 5 → 26.1%
* 6 → 13%
Saint Antiochus' Die
The Saint Antiochus' die always rolls a 3. Not 2. And especially not 4.
* 1 → 0%
* 2 → 0%
* 3 → 100%
* 4 → 0%
* 5 → 0%
* 6 → 0%
Shrinking Die
A very lightly loaded die. One can barely differentiate it from an ordinary die. This die has more chances of rolling ones or sixes.
* 1 → 22.2%
* 2 → 11.1%
* 3 → 11.1%
* 4 → 11.1%
* 5 → 11.1%
* 6 → 33.3%
St. Stephen's Die
A die blessed by St. Stephen, guaranteeing favorable numbers in the game and protection from loose stones. A unique die that is balanced and most likely to roll any side value.
* 1 → 16.7%
* 2 → 16.7%
* 3 → 16.7%
* 4 → 16.7%
* 5 → 16.7%
* 6 → 16.7%
Strip Die
Legend has it this die will help you undress many a wench. This die favors rolling a one and can sometimes roll the other values from two to six.
* 1 → 25%
* 2 → 12.5%
* 3 → 12.5%
* 4 → 12.5%
* 5 → 18.7%
* 6 → 18.7%
Three Die
For some reason, this die usually rolls a three. Why? The Three Die is highly favorable for rolling a three and sometimes, other side values.
* 1 → 12.5%
* 2 → 6.2%
* 3 → 56.2%
* 4 → 6.2%
* 5 → 12.5%
* 6 → 6.2%
Unbalanced Die
A playing die someone tried to load to his advantage, but didn't do a very good job. This die is weighted towards rolling ones and twos and is less likely to roll threes, fours, and sixes.
* 1 → 25%
* 2 → 33.3%
* 3 → 8.3%
* 4 → 8.3%
* 5 → 16.7%
* 6 → 8.3%
Unlucky Die
Sometimes Lady Luck is on your side, sometimes she isn't. With this die, she most likely isn't. This die is weighted towards rolling twos and is less likely to roll ones and sixes.
* 1 → 9.1%
* 2 → 27.3%
* 3 → 18.2%
* 4 → 18.2%
* 5 → 18.2%
* 6 → 9.1%
Wagoner's Die
According to legend, this die belonged to the famous Roman charioteer Arnuldus, whose tactics consisted of tiring his opponents or lulling them to sleep. More often, this die rolls twos and threes, with a lesser chance to roll a one.
* 1 → 5.6%
* 2 → 27.8%
* 3 → 33.3%
* 4 → 11.1%
* 5 → 11.1%
* 6 → 11.1%
Weighted Die
A mysterious playing die found in a ruined house. Suspiciously, it tends to land on 1.
* 1 → 66.7%
* 2 → 6.7%
* 3 → 6.7%
* 4 → 6.7%
* 5 → 6.7%
* 6 → 6.7%
Wisdom Tooth Die
A playing die made from a wisdom tooth. It is a die that is most likely to roll any side value.
* 1 → 16.7%
* 2 → 16.7%
* 3 → 16.7%
* 4 → 16.7%
* 5 → 16.7%
* 6 → 16.7%
Hot hands in a dice game
Mastering the dice game in Kingdom Come: Deliverance 2 is a balance of luck, strategy, and risk management. Knowing the scoring combinations, leveraging loaded dice, and using badges effectively can significantly improve your chances of winning. Whether you play cautiously to secure points or take bold risks for big rewards, understanding the mechanics will give you the upper hand against your opponents. With the right strategy and a bit of luck, you’ll soon be raking in the winnings and dominating every match.
Recommended Products
Nitro V 16
Buy Now
Nitro V 15
Buy Now
-
How to Use Console Commands in KCD 2
Console commands allow players to modify game mechanics, enable cheats, and tweak settings in Kingdom Come: Deliverance 2. Whether you want unlimited money, easier lockpicking, or gravity-defying horse jumps, console commands can help enhance your gameplay experience.
Why are console commands useful?
Console commands provide a unique way to customize the gameplay experience in Kingdom Come: Deliverance 2, offering both practical and experimental benefits. Many commands serve as quality-of-life improvements, such as enabling a crosshair while aiming a gun, which can improve combat precision. Others allow players to alter the game's difficulty by removing certain mechanics or making enemies more dangerous, catering to those who seek a greater challenge.
Beyond difficulty adjustments, console commands also open up creative and entertaining gameplay possibilities. They let players manipulate gravity, change the weather, or spawn unlimited resources, essentially allowing them to "play god" within the game world. Additionally, console commands provide the only way to acquire exclusive items from previous limited-time promotions, such as Twitch Drops, pre-order bonuses, and Gold Edition content. Since these promotions are no longer available, console commands ensure that no content is permanently locked away from players.
Do console commands disable achievements
No, using console commands in KCD2 does not disable Steam achievements. You can freely use them without worrying about missing out on accomplishments.
How to enable and use console commands
* Open Steam, right-click KCD2, and select Properties.
* In the General section, find Launch Options and enter -devmode.
* While in-game, press tilde (~) to open the console.
* Type a command and press Enter.
Useful console commands
1. Gameplay convenience
* Allows saving without Saviour Schnapps: wh_sys_NoSavePotion = 1
* Keeps the reticle visible when aiming with a bow or gun: wh_plshowfirecursor 1
* Hides the HUD for cleaner screenshots: wh_ui_showHUD = 0
* Removes fog of war from the map permanently: player_revealFow
2. Economy and inventory
* Adds X amount of Groschen to your inventory: wh_cheat_money X
* Adds an item to your inventory (replace X with an item ID): wh_cheat_addItem X
For a full list of all item descriptions, check out this spreadsheet.
3. Horse mechanics
* Instantly steals a horse by mounting it and using this command (ownership may reset on save/load or region changes): wh_horse_StealCurrentHorse
* Increases horse jump height (default is 1, max effective value is around 200): wh_horse_JumpHeight = 200
* Lowers horse gravity, allowing flight (use cautiously as you may keep floating indefinitely): wh_horse_JumpGravityMult = -0.1
* Prevents the camera from auto-centering while riding a horse: wh_horse_CameraCentering=0
4. Combat and difficulty
* Enables one-shot kills for both you and enemies: wh_rpg_OneShotKill = 1
* Removes guard pursuit if you're wanted: wh_cheat_set_wanted_level=0
5. Lockpicking
* Removes lockpicking shake for easier picking: wh_pl_LockPickingShakeOverride = 0
* Increases the amount of time you can lockpick before your pick breaks: wh_lockpickingdof = 50
6. Weather and environment
* Controls rain intensity (use 1 for heavy rain, -1 for no rain, or any value between 0-1 to adjust intensity): wh_env_RainIntensityOverride = -1
* Toggles whether the weather changes naturally (1 = enabled, 0 = disabled): wh_env_WeatherUpdateEnabled = 1
7. Exploration and movement
* Teleports you to specified coordinates: goto (coordinates)
* Displays your current coordinates for teleporting: wh_rpg_getLocation
Console commands provide a powerful toolset for players looking to modify their experience in Kingdom Come: Deliverance 2. Whether you're using them for convenience, challenge, or pure fun, they allow for deeper engagement with the game. While experimenting with cheats, always remember to save beforehand to avoid unintended consequences. With these commands, you can shape the world of Bohemia to your liking.
Recommended Products
Nitro V 16
Buy Now
Nitro V 15
Buy Now
-
Get Hands-on with Math: Acer x Intel SFI Starter Packs
In today’s classrooms, learning is no longer about rote memorization and repetitive problem-solving. Educators are embracing hands-on learning experiences to make subject matter more relevant, engaging, and applicable to the real world. By connecting concepts to practical challenges, students not only grasp complex ideas, but also develop critical thinking and problem-solving skills.
Acer, in collaboration with Intel's Skills for Innovation (Intel SFI) program, is at the forefront of this educational transformation. With a focus on equipping teachers with the tools they need, the Intel SFI Starter Packs (as discussed previously) are completely free, classroom-ready lessons designed to bring dynamic, interactive learning to classrooms. In this article, we’ll highlight how the Optimize, Design, & Minimize starter pack in particular offers math educators a powerful new way to engage students through real-world applications and creative problem-solving.
Optimize, Design, & Minimize
Part of a series of Acer x Intel SFI Starter Packs, the Optimize, Design, & Minimize starter pack serves as an innovative educational tool designed to offer a new way to teach mathematics in the classroom, and aims to empower educators to engage students through interactive, real-world problem-solving activities.
Focusing on key mathematical concepts like linear programming, this starter pack encourages students to think critically and creatively as they tackle optimization challenges, explore design thinking, and develop strategies to minimize resources or effort. By connecting math to the real-world scenario of packaging design, the module helps students understand the practical value of mathematics beyond the classroom.
This unique approach to learning in the classroom is complemented by completely free-to-use structured lessons and activities that promote logical reasoning and strategic thinking, allowing teachers to seamlessly integrate these lessons into their curriculum, and thus create engaging learning environments that better foster student curiosity.
Hands-on Learning Experiences
The Optimize, Design, & Minimize starter pack utilizes a more hands-on approach to problem-solving to aid in math education. Students move beyond abstract formulas and engage with real-world tools that they might use in the future. This approach not only makes learning more enjoyable, but also enhances retention and understanding. Each Intel SFI Starter Pack offers the following benefits:
* Foster Critical Thinking & Creativity: By presenting complex mathematical problems in a creative, open-ended format, this starter pack nurtures critical thinking. Students are encouraged to explore multiple solutions, evaluate their effectiveness, and refine their strategies.
* Enhance Engagement: For students, it might not seem like there are many occasions where they can apply the math skills they learn in the classroom. This starter pack bridges that gap by connecting math to real-life, easy to understand situations that enables them to put the theories they learn about in class into practice.
* Adaptable Learning Paths: Every classroom is diverse, with students having different learning speeds and styles, and each starter pack supports a variety of instruction methods, enabling teachers to adapt lessons to individual needs.
Activities within the Optimize, Design, & Minimize module are designed to be both challenging and relatable. Utilizing real-world applications such as Python and Jupyter Notebook, students explore how to apply linear programming to optimize designs, encouraging them to analyze complex problems, identify patterns, and develop effective solutions - all skills that are highly sought after in various fields, including engineering, technology, and business. These first-hand experiences help students see the value of mathematics in everyday decision-making, inspiring them to approach challenges with confidence and curiosity.
https://www.youtube.com/watch?v=X-jchPorehQ
Final Thoughts
The Optimize, Design, & Minimize starter pack is changing how students experience mathematics. By connecting math to real-world challenges and encouraging creative problem-solving, it equips students with essential skills they can carry into their future careers. This hands-on, interactive approach not only enhances student engagement but also fosters critical thinking and innovative mindsets.
For educators, integrating this starter pack into their curriculum means unlocking new teaching possibilities. Paired with Acer’s powerful and classroom-ready laptops that feature Intel Core processors, the learning experience becomes even more dynamic and effective. These powerful devices seamlessly support the interactive elements of the module, ensuring that students can fully engage with the content.
Ready to transform your math classroom? Completely free and ready to use, the Optimize, Design, & Minimize starter pack lets you see the impact of hands-on learning firsthand and comes with its own unique Teacher Deck, Educator Guide, and exercises. Click here to visit the Acer x Intel SFI Starter Pack page to learn more and get started today.
-
Top VPNs for Online Gaming in 2025
Why would you need a VPN for gaming?
Online gaming is more competitive and connected than ever, but with that connectivity comes risks and challenges. A Virtual Private Network (VPN) can enhance your gaming experience by reducing lag, bypassing geo-restrictions, and protecting against DDoS attacks or ISP throttling. Whether you're looking to access exclusive game servers, secure your personal data, or stabilize your connection, a good VPN can be a game-changer.
What makes a VPN good for gaming?
Not all VPNs are suitable for gaming. A great gaming VPN should offer:
* Low Latency & High-Speed Servers – Fast and responsive connections are crucial to avoid lag and ensure smooth gameplay.
* Wide Server Coverage – More global servers mean better chances of finding the best connection and bypassing regional restrictions.
* DDoS Protection – Safeguards against targeted attacks that can disrupt your gaming sessions.
* Stable and Unthrottled Connections – A VPN should prevent ISPs from slowing down your speed while keeping your connection stable.
* Gaming-Optimized Features – Some VPNs offer dedicated gaming servers, split tunneling, and advanced security settings for better performance.
With these factors in mind, let’s dive into the best VPNs for online gaming.
1. NordVPN
Founded in 2012 by a group of childhood friends, NordVPN has grown into one of the most reputable VPN services in the world. It is operated by Nord Security, a cybersecurity company based in Lithuania. Known for its commitment to privacy, NordVPN is registered in Panama, a jurisdiction with no mandatory data retention laws. Over the years, it has developed its own protocols and security features, making it a top choice for gamers who prioritize security, speed, and server availability.
Key Features:
* Server Network: 6,500+ servers in 111 countries, ensuring global access and low-latency connections.
* Security: Uses AES-256 encryption and offers built-in DDoS protection.
* Protocols: Supports NordLynx (a modified WireGuard protocol) for fast gaming speeds.
* Compatibility: Router installation support allows VPN protection for consoles like the PS5.
* Additional Features: Split tunneling, obfuscated servers (hiding VPN use), Threat Protection (blocks ads, trackers, and malware), and a strict no-logs policy.
2. Surfshark
Launched in 2018, Surfshark quickly became a well-known VPN provider thanks to its affordable pricing and high-quality service. In 2021, it merged with Nord Security, though both brands continue to operate independently. Surfshark is headquartered in the Netherlands, a country with strong digital privacy laws. With its unlimited device connections and WireGuard support, it is an excellent choice for gamers looking for value and performance.
Key Features:
* Server Network: 3,200+ servers in 100 countries.
* Security: AES-256 encryption with strong privacy measures, including a no-logs policy.
* Protocols: WireGuard support for fast, stable gaming performance.
* Compatibility: Router support allows protection for consoles.
* Additional Features: Unlimited simultaneous connections, split tunneling, CleanWeb (blocks ads and malware), and DDoS protection.
3. ExpressVPN
Founded in 2009 by Peter Burchhardt and Dan Pomerantz, ExpressVPN is headquartered in the British Virgin Islands, a jurisdiction known for strong privacy laws. It was acquired by Kape Technologies in 2021 but continues to operate as an independent service. ExpressVPN is widely praised for its proprietary Lightway protocol, which is designed for speed and security, making it one of the best choices for gaming despite its higher price tag.
Key Features:
* Server Network: 3,000+ servers in 105 countries.
* Security: Uses AES-256 encryption and provides DDoS protection.
* Protocols: Features the Lightway protocol, optimized for speed and low latency.
* Compatibility: Router installation support allows VPN use on consoles.
* Additional Features: Split tunneling, RAM-based servers for enhanced security, and a strict no-logs policy.
4. CyberGhost
CyberGhost was founded in 2011 in Bucharest, Romania, and is now part of Kape Technologies. It is one of the largest VPN services available, boasting a massive server network. CyberGhost is known for its user-friendly interface and dedicated gaming servers, making it a budget-friendly option for gamers who need low-latency performance.
Key Features:
* Server Network: 11,500+ servers in 100+ countries.
* Security: Implements AES-256 encryption and includes built-in DDoS protection.
* Protocols: Supports WireGuard, OpenVPN, and IKEv2 protocols.
* Compatibility: Router installation support for protecting gaming consoles.
* Additional Features: Split tunneling, gaming-optimized servers, DNS leak protection, and a 14-day refund policy.
5. Proton VPN
Developed by Proton AG, the company behind Proton Mail, Proton VPN launched in 2017 with a strong emphasis on security and privacy. Headquartered in Switzerland, a country with strict privacy laws, Proton VPN is an excellent choice for users who prioritize anonymity while gaming. It also features VPN Accelerator technology, which enhances performance on distant servers.
Key Features:
* Server Network: 9,200+ servers in 112 countries.
* Security: Military-grade AES-256 encryption with DDoS protection.
* Protocols: Supports WireGuard for low-latency gaming.
* Compatibility: Router installation support ensures console protection.
* Additional Features: VPN Accelerator for better speeds, a strict no-logs policy, and strong cross-platform support.
6. Mullvad
Mullvad was founded in 2009 in Sweden by Daniel Berntsson and Fredrik Strömberg with a strong emphasis on anonymity and privacy. Unlike most VPNs, Mullvad allows users to sign up without providing any personal information, and even accepts cash payments for complete anonymity. Its straightforward, no-nonsense approach to privacy and security makes it a top choice for those seeking an independent and transparent VPN. While it has the smallest server network among the VPNs on this list, users in Europe, North America, and Australia have reported excellent performance and reliability.
Key Features:
* Server Network: 690+ servers in over 50 countries.
* Security: Uses AES-256 encryption and features a kill switch that blocks internet access if the VPN disconnects.
* Protocols: Supports WireGuard for fast connections and OpenVPN with TCP or UDP options.
* Compatibility: As of Jan 2025 Mullvad started router installation support for console gaming protection.
* Additional Features: Maintains a strict no-logs policy, ensuring maximum user privacy.
Recommended Products
Nitro V 16
Buy Now
Nitro V 15
Buy Now
-
30 Useful Chromebook Shortcuts to Memorize by Heart
Whether you are working hard on a project or relaxing with your favorite movie, learning keyboard shortcuts can increase productivity and help you finish tasks faster. Pressing these key combinations eliminates the need to navigate menus, streamlining our workflow and potentially reducing wrist strain from repeated clicking.
Here are some of the most useful Chromebook keyboard shortcuts you can memorize for ultimate convenience and efficiency.
System and device controls
Here are some nifty shortcuts to lock your Chromebook, check its battery status, and switch between virtual desks.
* Lock your Chromebook instantly: Press Search + L
* Open ChromeOS Task Manager: Hit Shift + Esc
* Check your device’s battery percentage and status: Ctrl+ Alt + T
* Rotate the screen: Ctrl + Shift + Refresh (↻)
* Move a window between virtual desks: Ctrl + Alt + Shift + Left/Right
* Switch between virtual desks: Ctrl + Alt + Up/Down Arrow
* Mirror display to an external monitor: Ctrl + Shift + Refresh (↻)
General navigation and window management
Try these handy keyboard shortcuts to manage windows, switch between apps, and change to a different input method.
* Switch between open apps: Alt + Tab
* Open the keyboard shortcut helper: Ctrl + Alt + ?
* Switch keyboard input method (if multiple are set up): Ctrl + Space
* Open the Files app: Alt + Shift + M
* Sign out: Ctrl + Shift + Q (twice)
Chrome browser shortcuts
Learning these Chrome browser shortcuts will help you browse with convenience and ease.
* Close the current tab: Ctrl + W
* Open a new tab: Ctrl + T
* Reopen the last closed tab: Ctrl + Shift + T
* Jump to a specific tab (1-8): Ctrl + 1 to 8
* Jump to the last opened tab: Ctrl + 9
* Highlight the address bar: Ctrl + L
* Bookmark the current page: Ctrl + D
* Open browsing history: Ctrl + H
* Open an incognito window: Ctrl + Shift + N
* Show or hide the bookmarks bar: Ctrl + Shift + B
* Open the Chrome browser menu: Alt + E
Screenshot and clipboard shortcuts
These shortcuts make taking full or partial screenshots a breeze.
* Take a full screenshot: Ctrl + Window (F5 key)
* Take a partial screenshot: Ctrl + Shift + Window (F5 key)
* Paste without formatting: Ctrl + Shift + V
Zoom and accessibility
Check out the following shortcuts to learn how to zoom in or out of a webpage, open Google Assistant, or enable the screen reader.
* Zoom into a web page Ctrl + Shift + +
* Zoom out of a webpage: Ctrl + Shift + -
* Reset zoom to default: Ctrl + 0
* Enable or disable ChromeVox (screen reader): Ctrl + Alt + Z
* Open Google Assistant: Search + A
Browse faster with keyboard shortcuts
Chrome keyboard shortcuts let you complete tasks quickly and cut out long-winded menus. Using keyboard shortcuts instead of a mouse can also alleviate wrist strain, reducing the risk of repetitive strain injuries. These 30 time-saving shortcuts are a great start to transforming how you use your Chromebook. If you are looking for a particular shortcut but can’t see it here, check out the Chromebook keyboard shortcuts webpage.
Recommended Products
Chromebook Plus 515
Buy Now
Chromebook Plus 514
Buy Now
-
7 Step Guide to Set Up a New Chromebook
Apart from a new car and possibly a new house, there’s nothing more exciting than getting a new computer. A brave new world of possibility opens up when you plug that new laptop in for the first time. And in the case of a new Acer Chromebook, in just a few minutes after unboxing, you can be surfing the internet, multitasking and enjoying the new Chromebook experience in all its glory.
If you’re planning on getting a new Chromebook, good choice, and if you’ve already purchased a new Chromebook, and you’re figuring out your new Chromebook setup, congrats, you’re in the right place. Today we’re going to help you set up your new Chromebook like the boss of all bosses. We’ll cover all the vital steps, from downloading the best apps for Chromebook, to updating, customizing, and even how to secure your Chromebook. There’s lots to do, so let’s get started!
1. Complete Setup & Updates
Before you get down to work on your new Chromebook, there’s some basic housekeeping tasks that need to be attended to. While your new device is, well, new, technology moves quickly, and it won’t be long until you’ll want to update your Chromebook.
For the fastest, smoothest, and most responsive all-round Chromebook experience, completing your setup and syncing to your other devices is a must. By taking this step, all of your preferences, settings, and even bookmarks will be applied across your Google devices. So, make sure you’ve got a Google account and your password handy, then connect to Wi-Fi and sign in with your Google account. To sync your device:
Click the Settings icon > select You and Google > click Sync and Google Services.
Sorting your updates is similarly important, this will ensure ongoing device optimization by keeping your drivers and firmware up to date. Follow these steps to ensure the smooth runnings of your Chromebook for years to come:
Click the Settings icon > select About ChromeOS > click Check for updates.
2. Customize Your Chromebook
While your trusty new Chromebook may resemble many others in form, you’re an individual, and so is your Chromebook! Forget grey, boring, one-size-fits-all computing, make your new device truly yours. No matter how you choose to use your Chromebook, your wallpaper and your go to apps are all unique: customization is king! So, first of all you might want to set the scene and customize your wallpaper and theme. Simply go to Settings > click Personalization.
Don’t waste time looking for things you need, pin them to the shelf. For quick access to your favorite apps, simply choose the app you want to select and right-click > Pin.
Once you’ve sorted the look and the layout of your new Chromebook, it's time to add the personal touch to your device, and adjust touchpad settings:
Click the Settings icon > select Device > click Touchpad.
3. Install essential apps
The beauty of Chromebooks lies in their simplicity and practicality. With all of the great Google services at your command, make the most of productivity apps, including Google Docs for cloud based word processing and document editing. Let’s not forget Google Keep, your note-taking app for text, voice, and image notes, as well as checklists and reminders.
Keep your Chromebook well-organized for increased efficiency: file management is a breeze with Files by Google, while Snapdrop covers all your fast transfer needs. Moving on to media, VLC Media Player, Spotify, and YouTube Music are the bare essentials, and if you’re looking to dip your toes into the world of cloud gaming, then GeForce NOW and Xbox Cloud Gaming are your ride or die companions in the gaming universe.
4. Improve performance & battery life
Keeping your Chromebook performing at its best is in your best interests! Treat it right, and it will treat you right, delivering years of trouble free, no-frills computing. First, you’ll want to limit open tabs to reduce RAM usage while browsing the internet. Next, let’s deal with unused extensions which can really slow your steed down:
Launch Chrome > Click Extensions (under More tools) > Select Extension > Click Remove > Confirm Removal.
To conserve battery power, remember to lower screen brightness and disable Bluetooth when not in use. You should also adjust sleep and power settings to suit your requirements: Click the Settings icon > Select Device > Click Power.
5. Secure your Chromebook
By taking a few simple steps, you can safeguard your Chromebook against the ever-evolving threats out there in the wild west that is the world wide web. For general privacy, remember to set up a PIN or password: Click Settings icon > select Security & Privacy > click Lock screen.
For an extra layer of protection, enable two-factor authentication for your Google account. Finally, just in case you manage to lose your Chromebook, remember to fit it with a GPS tracker. You can also remote sign out of your Google account, as well. Here’s a helpful guide to finding your lost device.
6. Set up offline access
Another fine feature of the Google suite of apps in your new Chromebook is the possibility of offline access. There are several approaches to ensuring access wherever you go, regardless of internet connections. For rock-solid, fail-free file access, simply download your most-important files for offline use.
Enabling various Google apps can also improve your offline Chromebook experience. To enable Google Drive offline: Click Drive > Select Settings > Enable Offline.
Similarly, if you wish to enable Gmail offline: Open Gmail > Click Settings > Select Offline > Enable offline mail.
7. Explore Chromebook Features
As with any new tech that you might invest in, taking time to investigate the features of Chromebook can be a rewarding experience. In need of a helping hand? Then try Google Assistant (simply press the Search key and ask a question).
For multitasking, give Virtual Desks a go: Search + [ or ]. Finally, when it comes to file transfer forget email, messenger apps, and file transfer apps! For quick file transfers to people nearby, just enable Nearby Share, and your files will be transported in the blink of an eye.
Chrome standard
We hope that you’ve enjoyed our foray into the fun and efficient world of setting up your new Chromebook. As you can see -while Chromebooks offer great straight-out-of-the-box usability, with a bit of planning and preparation, you can set up a winning machine. So, before you get down to work on your new device, follow the seven steps covered in this article, and set yourself up for years of trouble-free Chromebook computing.
Recommended Products
Chromebook Plus 515
Buy Now
Chromebook Plus 514
Buy Now
-
How to Fix a Stuck or Dead Pixel: 5 Easy Methods to Try
Modern digital displays are made up of pixels, or tiny blocks of light. Each pixel consists of a subpixel that emits different intensities of red, green, and blue color to create our favorite TV shows, movies, and games. Pixels can either be backlit by an additional panel like LCD screens, or individually lit like OLED screens, but both run the risk of stuck or dead pixels. Let’s take a look at the differences between the two and how to fix them.
Stuck pixels vs. dead pixels
We see vibrant images on our screens thanks to millions of colored pixels. But what happens when one or more of these pixels stops working? A stuck pixel is characterized by a stubborn dot of light appearing in the same place that does not seem to change with the rest of the image. It could be red, green, blue, or a combination. Stuck pixels may appear because of a manufacturing defect, a transistor failure, or a temporary electronic issue, and can disturb the viewing experience. Like other pixels, stuck pixels continue to receive power from the source, but incomplete information means they do not light up as intended.
In contrast, a dead pixel is always off and tends to display a continuous black color. They are usually the result of physical damage or a manufacturing defect and reduce the overall screen real estate. Dead pixels do not continue to receive power and are therefore more difficult to rectify.
How to fix a stuck or dead pixel
The first step to fixing pixel issues is to figure out whether it is a stuck or dead pixel. Digital display users can do this by switching to a pure black screen and observing whether or not any pixels are still lit. Similarly, switching to a completely white screen will reveal if there are any dead pixels, which will appear as a continuous black dot.
Once we know what kind of pixel issue we are dealing with, we can try to rectify it using the following suggestions.
1. Turn the monitor off and on
It may be a classic solution to many IT-related issues, but switching a computer monitor off and on can resolve stuck pixels that appear due to temporary electronic faults. Rebooting the device can re-energize stuck pixels and leave them working as normal. Try this method multiple times for stubborn pixels, but be aware it will not work for dead pixels.
2. Try software fixes
Downloading and installing software such as JScreenFix, PixelHealer, UDPixel, or DPT Dead Pixel Trainer can locate stuck or dead pixels and provide free solutions to try and fix them. JScreenFixstates it can fix many stuck pixels in under 10 minutes, while PixelHealer uses a tried-and-tested method of flashing RGB colors over dead or stuck pixels to revive them. These software are user-friendly and a good first point of call when resolving pixel issues.
3. Massage the area
A pixel massage, or gently massaging the area around the affected pixel, can also rectify stuck pixels. First, switch off the monitor and apply soft pressure to the area using a cloth to protect the screen. While doing this, turn the display back on and release the pressure. This method can release stuck pixels by getting the liquid crystal moving. However, users are advised to exercise caution when trying a pixel massage, as too much pressure can break the monitor.
4. Use a slightly warm cloth
Warmth can also resolve pixel issues and help liquid crystals flow properly. Use a warm (not hot!) and dry cloth and gently press it against the affected area while the screen is still on.
5. Use the Acer warranty
Acer device users experiencing dead or stuck pixels can check whether or not the device is still under warranty. Warranty upgrades such as a basic extended service to prolong coverage are available on the Acer website.
Stuck and dead pixels: final thoughts
Pixels are tiny lights that work together to create images in games, movies, or TV shows on our screens. However, as with any technology, they are susceptible to faults or damage. Stuck or dead pixels manifest as continuous black or colored dots on a device screen. Although they can be annoying, there are a few ways to resolve pixel issues. These include massaging the stuck or dead pixel, switching devices off and on again, or getting it fixed via the manufacturer if the device is still under warranty.
Recommended Products
Swift 14 AI (Intel)
Buy Now
Swift 14 AI (AMD)
Buy Now
AKAZE earned the Name Dropper badge.Mentioning someone in a discussion (like this: @Name) is a great way to encourage dialog and let them know who you’re talking to.5:57PM
AKAZE earned the First Comment badge.Commenting is the best way to get involved. Jump in the fray!5:28PM
