-
Fun House Mirror Effect on OLED Panels
Why are the reflections in my OLED screen all wavey and curvy?When the screen of your notebook is turned off and the (sun)light hits your screen just right, you will see reflections in the screen. On some screens, the reflections might be wavey or curvy. See the image below for reference. This effect is referred to as the…
-
Acer PM161Q monitor displays "No Signal" message when connected
Why do I get a "No Signal" error when I connect my PM161Q monitor? The Acer PM161Q monitor is only compatible with devices that support USB 3.1 video output. When your PM161Q is connected to a USB-C port that supports video output, it should automatically detect and show the image from the connected device. If your monitor…
-
What color gamuts are supported on ConceptD monitors?
You can find information below on what color gamuts are supported on ConceptD displays. ConceptD CP7 Monitor: 99% Adobe® RGB Color Space * 93% DCI-P31 * ConceptD CP3 Monitor: 90% DCI-P3 * * Specifications may vary depending on model and/or region.
-
How to adjust the Gamma and Color Temp setting on the EI491CR monitor
How do I adjust the Gamma and Color Temp setting on my EI491CR monitor? The HDR setting in the Monitor menu is set to "Auto" by default. You will need to turn off the HDR setting to allow custom settings for Gamma and Color Temp. You can press the HDR button on your remote, or use the monitor menu to turn off HDR. * Press…
-
Enable 144Hz on Acer EI491CR monitor
How do I setup my monitor to display 144Hz? You can configure the Acer EI491CR monitor to display up to 144Hz using the Display Port connection. You can see a list of supported resolutions and refresh rate for each port below. DP (1.2): 3840x1080 supports 120Hz (Supports overclocking up to 144Hz, but there is no guarantee…
-
Setup Acer EI491CR monitor for Picture-By-Picture (PBP) Mode
How do I setup my monitor to show two different inputs side-by-side? The picture-by-picture feature allows you to show video from two different inputs on the left and right sides of the screen. Use the steps below to configure your monitor to show two input sources side-by-side. * Connect the two video sources you want to…
-
Setup Acer monitor for Picture-By-Picture (PBP) Mode
How do I setup my monitor to display the image from multiple inputs? The picture-by-picture feature allows you to show video from two different inputs on the left and right sides of the screen. Use the steps below to configure your monitor to show two input sources side-by-side. * Connect the two video sources you want to…
-
Support for G-SYNC compatible monitors
How do I setup my G-SYNC compatible Acer display? Some Acer FreeSync monitors have been qualified by NVIDIA to be G-SYNC compatible. This means NVIDIA has tested the monitor and offers drivers to allow you to enable G-SYNC compatibility. You can find a list of G-SYNC compatible monitors at…
-
Predator monitor may flicker when overclocked to the maximum setting
Why does the screen on my Predator monitor flicker? Some Predator monitors allow for overclocking to gain additional performance from the product. Overclocking your monitor to a higher refresh rate may cause performance instability. This instability will not hurt or damage your product, but may cause your display to…
-
Unable to connect Air Monitor to smartphone
Why am I unable to connect my Air Monitor to my mobile device? Try the instructions below if your Air Monitor is unable to connect to your smartphone. * Reset the Wi-Fi: Press and hold the function button on the top of the Acer Air Monitor for 5 seconds until you hear a long “beep”. * Verify your smartphone hardware and…