How can I safely clean and disinfect my Acer products?
The CDC recommends using alcohol-based wipes or a spray consisting of 70% isopropyl alcohol and 30% water for disinfecting electronics. Both are considered safe to use to clean your Acer products. Make sure to squeeze out any excess liquid from the wipe and be careful not to use cleaners or wipes that contain chlorine, bleach, acetone or ethyl alcohol. It is also recommended that you follow CDC recommendations for disinfecting work areas and electronics, as well as EPA guidelines for safe and effective disinfectant use.
Precautions:
- Use all cleaning products in accordance with the directions for use.
- Never clean your product while system is on. Make sure to disconnect your product from any power source and remove all external devices and cables.
- Use only a soft, lint-free cloth to wipe down your product. Avoid using abrasive materials such as abrasive cloths, towels, paper towels or similar materials.
- Gently wipe your product to clean it. Do not use excessive pressure or force which may cause permanent damage to the product.
- Do not spray any liquid directly onto the product or allow liquids to get into the gaps of the product. Excessive moisture can damage your product and liquid damages are not covered by the Acer Warranty.
- Do not use aerosol sprays, bleaches or abrasive cleaners.
- Do not use any liquid that contains acetone, bleach, chlorine, toluene, ethyl acid, ammonia or methyl chloride.
- Do not spray cleaner directly on the LCD panel, and ensure the LCD panel is dry before closing the lid.
- Isopropyl alcohol is flammable and should not be used near spark or open flame.
- Prolonged use of chemical cleaners may cause discoloration or paint bubbling.
Disinfecting your Acer products
Electronic devices that are shared or in public locations should be frequently cleaned and disinfected regularly to help insure a safer working environment. You may want to wear a disposable mask and gloves while disinfecting your product to reduce the likelihood of cross-contamination. These items can be discarded after use. You can use the instructions below for cleaning your Acer products.
- Gently wipe down your product thoroughly with an alcohol-based cleaning wipe or a soft cloth that has been sprayed with 70% Isopropyl alcohol and water. Make sure to squeeze out any excess liquid from your wipe or cloth so you do not allow any liquid to get into the product.
- Wipe away any excess moisture that remains on the surfaces with a soft cloth if needed.
Cleaning your Acer products
Cleaning exterior surfaces
Use a moist disinfecting wipe or 70% alcohol sprayed on a soft cloth to gently wipe the eternal surfaces of the product. If there are still marks or streaking, gently wipe a dry cloth in the same direction moving from the top of LCD panel to the bottom.
Cleaning the Screen/LCD panel
Use a moist disinfecting wipe or 70% alcohol sprayed on a soft cloth to gently wipe the LCD panel. If there are still marks or streaking, gently wipe a dry cloth in the same direction moving from the top of LCD panel to the bottom.
Cleaning the keyboard
Use a small vacuum with brush to clear the keyboard of debris. You can also use a can of compressed air to blow away any particles that are stuck in between keys. Do not use an air compressor. You can wipe the keys with a moist disinfecting wipe or 70% alcohol sprayed on a soft cloth to disinfect. Make sure you squeeze out the wipe or cloth well to ensure no moisture gets into the keyboard.
Cleaning the Cooling Vents
Cooling vents allow hot air to flow out of the product to keep it cool. Cooling vents may be located on the side, back and/or bottom of the product. Use a small vacuum to remove dust or debris that has accumulated in the vents. You can also use a can of compressed air to blow out the vents. Do not use an air compressor.
Cleaning the I/O Ports
Use a small vacuum or a can of compressed air to remove any debris that may have accumulated in or around the I/O ports. You can also use a can of compressed air to blow out the ports. Do not use an air compressor.
Cleaning your mouse
Use a moist disinfecting wipe or 70% alcohol sprayed on a soft cloth to gently wipe the eternal surfaces of the product. If there are still marks or streaking, gently wipe a dry cloth in the same direction moving from the top of LCD panel to the bottom.
Note: To find a list of products approved for killing the SARS-Cov-2 (Covid-19) virus, visit the EPA website https://www.epa.gov/pesticide-registration/list-n-disinfectants-use-against-sars-cov-2-covid-19.
Disclaimer
Disinfecting wipes and their chemical composition may vary greatly and the materials used during manufacturing Acer products may vary. The above information is provided for general informational purposes and may not apply to all Acer products. Excessive cleaning of your Acer products may cause discoloration or cosmetic changes to the product finish over time and may impact your product warranty. Prolonged use of cleaning agents or use of improper cleaners may have long-term impacts to your health and impact the functionality of your device. All cleaning products should be used in a well ventilated area in accordance with the instructions from the manufacturer.
